Plates and panels
Elastomer Substrate with Micro-channels
- Bounding box
- 120.0 × 60.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular elastomer substrate sheet measuring 120 mm in length, 60 mm in width, and 3 mm in thickness. On the top surface, design three parallel micro-channels running lengthwise across the sheet; each channel should be 1.5 mm wide, 1 mm deep, and spaced 5 mm apart from center to center. At both the inlet and outlet ends of each micro-channel, add a 4 mm circular contact pad that is flush with the surface. Finally, apply a 2 mm radius fillet to all four vertical corners of the rectangular base sheet.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 120 mm | 50 – 200 |
| Width | 60 mm | 20 – 150 |
| Thickness | 3 mm | 1 – 10 |
| Channel Width | 1.5 mm | 0.5 – 5 |
| Channel Depth | 1 mm | 0.2 – 2.5 |
| Channel Spacing (center-to-center) | 5 mm | 2 – 20 |
| Corner Fillet Radius | 2 mm | 0.1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service