Plates and panels
ecoDRYER E-002 Water-to-Air Finned Coil | DN500 Air | DN80 Water
- Bounding box
- 1370.0 × 1422.4 × 1252.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Industrial ecoDRYER water-to-air finned coil, 1200 mm wide x1000 high x550 deep. 7500 m³/h nominal process air through 400mm tapered DN500 front inlet and rear outlet. Hot water DN80 upper right Z800 and return DN80 lower right Z200; two 150mm outward spigots and flanges. Five parallel four-pass water circuits comprising 20 hollow horizontal SS tubes, left and right U-bend returns, two perforated distribution headers (nozzle bores and tube bores), 20 perforated aluminum fin plates, four support feet, top access panel, air vent, drain, sensor ports. Separate individually coloured CAD parts. Isometric inspect in TextoCAD using front-right view. Geometry concept only, no thermal/hydraulic performance guarantee.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing width along tubes | 1200 mm | 1100 – 1350 |
| Housing air passage depth | 550 mm | 500 – 650 |
| Housing height from base | 1000 mm | 950 – 1100 |
| Stainless steel shell sheet thickness | 4 mm | 3 – 6 |
| Front/rear process air bore DN500 | 500 mm | 480 – 530 |
| Each air transition length | 400 mm | 370 – 470 |
| Housing rectangular air throat width | 940 mm | 870 – 990 |
| Housing rectangular air throat height | 820 mm | 750 – 880 |
| Hot and return water bore DN80 | 80 mm | 75 – 90 |
| DN80 external pipe projection | 150 mm | 130 – 200 |
| Hot inlet above housing base | 800 mm | 760 – 840 |
| Water return above housing base | 200 mm | 170 – 240 |
| Stainless water tube OD (concept) | 32 mm | 26 – 38 |
| Stainless tube wall gauge | 2 mm | 1.5 – 3 |
| Parallel water circuit lanes | 5 | 4 – 5 |
| Tube pitch transverse to X | 80 mm | 75 – 85 |
| Aluminium fin plates shown (illustrative) | 20 | 12 – 28 |
| Aluminium fin thickness | 1.2 mm | 0.8 – 2 |
| Water distribution header OD | 100 mm | 92 – 112 |
| Support feet height | 180 mm | 140 – 230 |
| Inspection hatch clear width | 320 mm | 280 – 380 |
| Inspection hatch clear depth | 180 mm | 150 – 220 |
| Temperature sensor port bore | 22 mm | 18 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec