Plates and panels
E61 Touring 2004 - body shell final (panels, glass, tunnel, lights)
- Bounding box
- 4863.0 × 2146.0 × 1278.1 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Build a full BMW E61 from 2004 with the M54B25 engine and 6HP21 transmission, very detailed, every part designed separately. Module 8 (final body): body panels, glass, lights, mirrors, rails, firewall and transmission tunnel, with left/right naming corrected (+Y = left).
Parameters
| Name | Value | Range |
|---|---|---|
| Wheelbase | 2888 mm | 2500 – 3300 |
| Body width | 1846 mm | 1600 – 2000 |
| Height (with roof rails) | 1468 mm | 1440 – 1560 |
| Front overhang | 830 mm | 600 – 1000 |
| Rear overhang | 1123 mm | 900 – 1300 |
| Underbody height | 190 mm | 120 – 300 |
| Panel skin thickness | 3 mm | 2 – 6 |
| Tyre radius (225/50 R17) | 328 mm | 280 – 380 |
| Crank / gearbox axis height | 320 mm | 290 – 360 |
| Transmission tunnel outer radius | 190 mm | 175 – 220 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
A4 1:1 Speaker Template
Generate a flat, printable 1:1 scale paper template on an A4 canvas (210mm x 297mm) with a light gray 5mm grid overlay. Use inches for all cutting dimensions to ensure maximum prec
SnackGrip - Wearable Snack Utensil
Design a minimalist, ergonomic, 3D-printable wearable snack utensil called SnackGrip. It should have two hollow finger rings for the index and middle fingers, connected by a small