Gears and transmission
Dry Friction Block & Pulley Apparatus
- Bounding box
- 282.3 × 70 × 122 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a working 2D physics simulation of a horizontal dry-friction experiment. Show a 1 kg block sliding on a fixed horizontal wooden surface. Connect the block by a string passing over a 50 mm rotating pulley to a hanging mass. The hanging mass must pull the block, while friction opposes its movement. Allow me to adjust the block mass, hanging mass, and friction coefficients (static and kinetic). Show the pulling force, normal reaction, friction force, velocity and acceleration. Include Start, Pause and Reset buttons. Calculate μs = Fs/N and μk = Fk/N. Make the setup interactive and obey real Newtonian physics.
Parameters
| Name | Value | Range |
|---|---|---|
| Sliding track length | 200 mm | 120 – 320 |
| Track width | 70 mm | 40 – 140 |
| Track plank thickness | 8 mm | 4 – 16 |
| Track top height above the bed | 70 mm | 50 – 120 |
| Pulley outer diameter | 50 mm | 30 – 80 |
| Pulley width | 12 mm | 6 – 24 |
| Sliding block mass (kg) | 1 mm | 0.1 – 5 |
| Hanging mass (kg) | 0.5 mm | 0.1 – 5 |
| Static friction coefficient | 0.5 mm | 0 – 1.2 |
| Kinetic friction coefficient | 0.35 mm | 0 – 1.2 |
| Fork plate thickness | 3 mm | 1.2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
