Gears and transmission
Drive shaft and chuck (parts 1-2)
- Bounding box
- 28.0 × 28.0 × 233.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Smart acetabular reamer, parts 1-2 in assembled positions (global coordinates: origin on the shaft axis at the very rear of the tool, +Z forward, +Y up). Chuck Z100-140: 12 mm rear spigot with 5 mm D socket for the gearbox, 28 mm body, 27 mm deep double-D socket (8.05 bore, 6.55 across flats), two 3 mm ball-detent holes and a retaining-ring groove at Z132. Drive shaft Z113-333: 8 mm h6, double-D drive end 6.5 across flats for 25 mm, 3 mm cross hole at Z327 with a 3 x 14 dowel pin for the reamer head bayonet.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft diameter | 8 mm | 6 – 10 |
| Shaft rear end (Z) | 113 mm | 105 – 120 |
| Shaft length | 220 mm | 180 – 260 |
| Drive flats across | 6.5 mm | 5 – 7.5 |
| Drive flats length | 25 mm | 15 – 27 |
| Cross pin from front end | 6 mm | 3 – 10 |
| Cross pin diameter | 3 mm | 2 – 4 |
| Cross pin length | 14 mm | 10 – 16 |
| Chuck rear (Z) | 100 mm | 95 – 110 |
| Chuck body diameter | 28 mm | 20 – 34 |
| Socket depth | 27 mm | 20 – 29 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
