Plates and panels
Drainage Waste Collector Frame
- Bounding box
- 1005.0 × 670.0 × 1720.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 27, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a design for our thesis. Our thesis is a drainage waste collecor system. There is a draiange grate above the machine. The machine is just that/ There is a four leg for mesh trash. in leg, there is a roller so that the trash can move upward and downward. It connects on electric hoist. The control panel of electric hoist is above the drainage or on the street. A electric hoist is attach below the trash so that it lift the trash. there s also a ultrasonic sensor that detects the trash if it is full. Control panel of the hoist and the reg light is attach on one pole.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (X) | 900 mm | 600 – 1800 |
| Frame Width (Y) | 600 mm | 400 – 1200 |
| Frame Height | 750 mm | 500 – 1600 |
| Post Section | 60 mm | 30 – 120 |
| Rail Section | 50 mm | 20 – 100 |
| Bottom Rail Height | 120 mm | 40 – 400 |
| Base Plate Size | 130 mm | 80 – 260 |
| Base Plate Thickness | 14 mm | 6 – 40 |
| Anchor Hole Diameter | 14 mm | 6 – 30 |
| Basket Length | 740 mm | 300 – 1600 |
| Basket Width | 440 mm | 250 – 1000 |
| Basket Height | 400 mm | 150 – 900 |
| Basket Wall Thickness | 3 mm | 1.5 – 10 |
| Basket Bottom Height | 310 mm | 60 – 800 |
| Perforation Hole Dia | 14 mm | 4 – 60 |
| Perforation Pitch | 40 mm | 18 – 120 |
| Grating Thickness | 8 mm | 3 – 25 |
| Grating Slot Width | 14 mm | 4 – 60 |
| Grating Slot Pitch | 32 mm | 12 – 120 |
| Guide Column Diameter | 30 mm | 10 – 80 |
| Guide Arm Section | 30 mm | 10 – 80 |
| Control Pole Diameter | 40 mm | 15 – 90 |
| Control Pole Height | 900 mm | 300 – 2000 |
| Panel Width | 200 mm | 80 – 400 |
| Panel Height | 300 mm | 100 – 600 |
| Panel Thickness | 60 mm | 20 – 160 |
| Beacon Light Diameter | 70 mm | 30 – 150 |
| Beacon Light Height | 90 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec