Plates and panels
Double Plate with Tapered and Stiffened Tip
- Bounding box
- 7326.1 × 2825.9 × 304.2 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
368 Make a double plate that can be 3D printed. The plate is 2.4m wide and 7.2m long. From about 2/3 of the length, the plate should go in towards a point, like a bottom in a boat. Upper layer 10mm, lower layer 10mm. Between the layers a corrugated plate of 10mm for rigidity. Stiffness and strength at the pointed end should be 10 times as strong, you then change the height of the corrugated plate and or the width of the waves.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Length | 7200 mm | 100 – 10000 |
| Total Width | 2400 mm | 100 – 5000 |
| Taper Start Fraction | 0.67 | 0.5 – 0.9 |
| Top Layer Thickness | 10 mm | 1 – 50 |
| Bottom Layer Thickness | 10 mm | 1 – 50 |
| Initial Core Height | 50 mm | 10 – 200 |
| Stiffness Factor at Tip | 10 | 1 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con