Director's Award Desk Set

TASK: Create a detailed, 3D-printable replica of the attached reference image as a collection of separate, mechanically compatible STL files. IMPORTANT: Reproduce the overall shape, proportions, arrangement, and recognizable details of the reference image as closely as possible. Do not create a new design or simplify the main objects unnecessarily. FINAL ASSEMBLED SIZE: - Maximum overall width: 150 mm. - Maximum overall depth: 100 mm. - Maximum overall height: 150 mm. - Use millimeters. - Design specifically for FDM 3D printing with PLA filament. - The complete model must fit within these dimensions when assembled. DESIGN THE FOLLOWING PARTS AS SEPARATE STL FILES: PART 1 — DIRECTOR'S CHAIR (chair.stl) Create a miniature black director's chair matching the reference image. Include: - Two crossed X-shaped leg assemblies. - A fabric-style seat represented by a printable solid surface. - A rectangular backrest with raised or recessed "DIRECTOR" lettering. - Two armrests. - Vertical backrest support posts. - Small decorative hinge details. - Structurally connected parts or suitable assembly joints. - Avoid extremely thin elements that could break during printing. PART 2 — OSCAR-STYLE STATUETTE (trophy.stl) Create a miniature gold-award-style human statuette. Include: - A standing human figure. - Arms crossed over the chest. - Clearly defined head, torso, legs, and arms. - A circular two-tier pedestal. - A flat, stable underside. - Simplify tiny anatomical details only when necessary for reliable printing. PART 3 — CAMERA (camera.stl) Create a miniature replica of the camera shown in the reference image. Include: - A rectangular mirrorless camera body. - A large cylindrical lens protruding from the front. - A circular front lens opening with concentric rings. - A raised viewfinder on top. - Top control dials. - Front grip and recognizable camera-body details. - Raised "FUJIFILM" and "X-T4" lettering if technically feasible. - Make the lens and camera body one connected printable piece unless separate components improve printability. PART 4 — EMPTY PEN HOLDER (penholder.stl) Create the tall rectangular black pen holder shown on the right side of the reference image. IMPORTANT: DO NOT INCLUDE A PEN. Include: - A hollow vertical cavity at the top for inserting a real pen. - A stable, thick-walled rectangular body. - A decorative filmstrip motif on the front. - A flat bottom. - A cavity sized for a real pen. - Default pen opening:

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.