Gears and transmission
Differential Assembly Exploded
- Bounding box
- 2675 × 187.7 × 150 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design a complete automotive rear-wheel differential assembly with the following specifications: **Overall dimensions:** - Length: 220 mm - Width: 200 mm - Height: 160 mm **Components and dimensions:** 1. **Differential housing:** 150 mm diameter, 110 mm internal width, cast aluminum alloy. 2. **Ring gear:** Spiral bevel gear, 140 mm outer diameter, 25 mm thickness, 40 teeth. 3. **Drive pinion:** Spiral bevel gear, 45 mm outer diameter, 35 mm length, 10 teeth. 4. **Side gears (x2):** Bevel gears, 55 mm outer diameter, 18 teeth each. 5. **Spider gears (x2):** Bevel gears, 40 mm outer diameter, 12 teeth each. 6. **Cross pin:** Hardened steel, 16 mm diameter, 65 mm length. 7. **Output shafts (x2):** 30 mm diameter. 8. **Bearings:** Standard tapered roller bearings, appropriately sized for the shafts. 9. **Fasteners:** Include all necessary bolts, retaining rings and spacers. **Assembly requirements:** - Use realistic spiral bevel gear geometry. - Ensure correct gear meshing and alignment. - Model every component as a separate solid body. - Include all necessary mounting interfaces and bearing seats. - Use realistic materials and engineering proportions. **FINAL RENDER REQUIREMENT:** Generate the differential fully assembled, with all components in their final positions. Show one high-quality, realistic 3D engineering render from an isometric perspective. Do not generate an exploded view. Prioritize mechanical coherence, dimensional accuracy and professional CAD quality.
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between exploded parts | 230 mm | 150 – 500 |
| Housing outer diameter | 150 mm | 80 – 300 |
| Housing internal width | 110 mm | 40 – 220 |
| Housing wall thickness | 6 mm | 3 – 20 |
| Pinion nose length | 70 mm | 20 – 150 |
| Pinion nose outer diameter | 50 mm | 20 – 100 |
| Mounting tab width | 30 mm | 10 – 80 |
| Ring gear outer diameter | 140 mm | 40 – 300 |
| Ring gear thickness | 25 mm | 5 – 80 |
| Ring gear tooth count | 40 mm | 12 – 100 |
| Drive pinion outer diameter | 45 mm | 20 – 120 |
| Drive pinion length | 35 mm | 10 – 100 |
| Drive pinion tooth count | 10 mm | 5 – 50 |
| Side gear outer diameter | 55 mm | 20 – 120 |
| Side gear tooth count | 18 mm | 8 – 60 |
| Spider gear outer diameter | 40 mm | 15 – 100 |
| Spider gear tooth count | 12 mm | 6 – 60 |
| Cross pin diameter | 16 mm | 3 – 40 |
| Cross pin length | 65 mm | 20 – 150 |
| Output shaft diameter | 30 mm | 5 – 80 |
| Output shaft exposed length | 90 mm | 20 – 200 |
| Bearing bore | 30 mm | 5 – 80 |
| Bearing outer diameter | 55 mm | 10 – 110 |
| Bearing width | 18 mm | 4 – 50 |
| Fastener nominal diameter | 8 mm | 3 – 20 |
| Ring gear bolt diameter | 10 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
