Loading the interactive model…
Interactive 3D model of Diesel Storage Tank with Fittings and SupportsEverything else
Diesel Storage Tank with Fittings and Supports
3 views
- Bounding box
- 4072.0 × 2597.5 × 2367.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- September 8, 2026
Download
Free to download and use. See the terms.
The prompt
добавить размеры
Parameters
| Name | Value | Range |
|---|---|---|
| Tank Length | 4032 mm | 1000 – 6000 |
| Tank Width | 2400 mm | 500 – 4000 |
| Tank Height | 2012 mm | 500 – 4000 |
| Bottom Thickness | 8 mm | 3 – 20 |
| Side Wall Thickness | 6 mm | 3 – 20 |
| Roof Thickness | 6 mm | 3 – 20 |
| Manhole Diameter | 500 mm | 200 – 800 |
| Manhole Height | 100 mm | 50 – 300 |
| Manhole X Position | 1200 mm | 0 – 4032 |
| Manhole Y Position | 1950 mm | 0 – 2400 |
| Vent Diameter | 100 mm | 50 – 200 |
| Vent Height | 80 mm | 30 – 200 |
| Vent X Position | 2000 mm | 0 – 4032 |
| Vent Y Position | 1980 mm | 0 – 2400 |
| Filling Pipe Diameter | 100 mm | 50 – 200 |
| Filling Pipe Height | 150 mm | 50 – 300 |
| Filling Pipe X Position | 800 mm | 0 – 4032 |
| Filling Pipe Y Position | 1950 mm | 0 – 2400 |
| Filling Flange Diameter | 150 mm | 100 – 300 |
| Filling Flange Thickness | 10 mm | 5 – 20 |
| Drain Pipe Diameter | 80 mm | 40 – 150 |
| Drain Pipe Length | 150 mm | 50 – 300 |
| Drain Pipe X Position | 2238 mm | 0 – 4032 |
| Drain Pipe Y Position (from bottom) | 150 mm | 0 – 2012 |
| Drain Flange Diameter | 120 mm | 80 – 200 |
| Drain Flange Thickness | 10 mm | 5 – 20 |
| Level Indicator Diameter | 50 mm | 20 – 100 |
| Level Indicator Height | 100 mm | 50 – 200 |
| Level Indicator X Position | 1800 mm | 0 – 4032 |
| Level Indicator Y Position | 1950 mm | 0 – 2400 |
| Lifting Lug Diameter | 40 mm | 20 – 80 |
| Lifting Lug Height | 60 mm | 30 – 120 |
| Support Beam Height | 200 mm | 100 – 400 |
| Beam Flange Width | 75 mm | 40 – 150 |
| Beam Web Thickness | 8 mm | 4 – 20 |
| Beam Flange Thickness | 10 mm | 4 – 20 |
| Number of Support Beams | 5 | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS