Plates and panels
Dielectric Spacer Plate
- Bounding box
- 30.0 × 30.0 × 1.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Plate 2: The Dielectric Spacer Create a new Part. Sketch the same 30 mm x 30 mm outer boundary and the same 3.0 mm dowel pin holes in the corners. Link the extrusion depth to a Global Variable named "Gap_Distance" and set it to 1.0 mm. This allows you to rapidly generate different spacer thicknesses later without remodeling. Sketch a 10 mm diameter circle at the origin and use Extruded Cut (Through All). This provides a massive clearance pocket so the high-voltage fluid only interacts with the extractor, not the spacer walls.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 30 mm | 5 – 200 |
| Depth | 30 mm | 5 – 200 |
| Gap_Distance | 1 mm | 0.1 – 20 |
| Dowel Hole Diameter | 3 mm | 0.5 – 15 |
| Dowel Hole Offset From Edges | 5 mm | 1 – 15 |
| Center Clearance Hole Diameter | 10 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service