Gears and transmission
Desk Buddy 3D Printable Robot
- Bounding box
- 209 × 118 × 186.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 44
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a small cute mobile desk robot, around 180 mm tall. It should look like a friendly compact robot, NOT a rectangular electronics box. - Rounded square body with soft corners - Large OLED screen on the upper front as its face - Small VL53L0X distance sensor mounted on top, facing forward - Two small movable robot arms on the left and right, powered by SG90 servos - Two large drive wheels on the lower left and right sides - Small caster/support wheels underneath - Hollow body with space for Arduino Nano, battery, TB6612FNG, motors and wiring - Separate printable parts for body, arms, wheels, sensor holder and OLED bezel - Designed for easy FDM 3D printing Make the robot look like a cute little desk companion with a recognizable character, not like a box or tank. Use approximate dimensions for now; exact measurements will be added later.
Parameters
| Name | Value | Range |
|---|---|---|
| Body width X | 130 mm | 100 – 180 |
| Body depth Y | 110 mm | 90 – 160 |
| Body height Z | 140 mm | 100 – 200 |
| Body wall thickness | 2.5 mm | 2 – 4 |
| Body corner radius | 8 mm | 2 – 12 |
| Body floor clearance | 20 mm | 10 – 60 |
| OLED opening width | 34 mm | 20 – 50 |
| OLED opening height | 18 mm | 10 – 30 |
| Sensor window width | 12 mm | 6 – 30 |
| Sensor window height | 8 mm | 5 – 20 |
| Top cover height | 8 mm | 5 – 15 |
| Cover shell thickness | 2.5 mm | 2 – 4 |
| Ventilation slot count | 5 mm | 0 – 12 |
| Screw tab width | 8 mm | 5 – 15 |
| Drive wheel diameter | 60 mm | 40 – 90 |
| Drive wheel width | 18 mm | 10 – 40 |
| Wheel shaft diameter | 6 mm | 4 – 10 |
| Drive axle height above floor | 30 mm | 10 – 60 |
| Motor bracket width | 45 mm | 35 – 70 |
| Motor bracket depth | 30 mm | 20 – 50 |
| Motor bracket height | 26 mm | 15 – 40 |
| Motor bracket screw slot width | 3 mm | 2 – 5 |
| Caster wheel diameter | 12 mm | 6 – 20 |
| Caster stem diameter | 3 mm | 2 – 6 |
| Caster inset from body edge | 18 mm | 5 – 40 |
| Arm length | 75 mm | 40 – 120 |
| Arm width | 18 mm | 10 – 40 |
| Arm thickness | 8 mm | 5 – 15 |
| Arm pivot hole diameter | 3 mm | 2 – 6 |
| Arm pivot height above floor | 135 mm | 80 – 160 |
| Servo bracket width | 32 mm | 20 – 50 |
| Servo bracket depth | 22 mm | 12 – 40 |
| Servo bracket height | 18 mm | 10 – 30 |
| Servo bracket screw hole diameter | 2 mm | 1.6 – 3 |
| OLED holder width | 40 mm | 25 – 60 |
| OLED holder height | 24 mm | 15 – 40 |
| OLED holder thickness | 4 mm | 2 – 8 |
| OLED window width | 30 mm | 20 – 40 |
| OLED window height | 16 mm | 10 – 25 |
| OLED holder height above floor | 105 mm | 60 – 140 |
| Top sensor holder width | 36 mm | 24 – 60 |
| Top sensor holder depth | 28 mm | 18 – 50 |
| Top sensor holder height | 18 mm | 10 – 30 |
| Top sensor holder wall thickness | 2.5 mm | 1.6 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
