Plates and panels
Demonstrador de electromagnetismo (exploded view)
- Bounding box
- 1490.0 × 220.0 × 315.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Genera un plano técnico 3D de un demostrador de electromagnetismo de mesa. La base mide 20 cm × 20 cm y está hecha de acrílico o madera. En el centro hay un eje vertical de acero inoxidable de 3 mm sostenido por dos rulemanes 693ZZ (3×8×4 mm). El eje soporta un disco de 20 cm de diámetro y 4 mm de espesor. Debajo del eje se encuentra un motorreductor N20 de 12 V y 1000 rpm, unido mediante un acople de eje de 3 mm a 3 mm. Alrededor del disco hay cuatro soportes para bobinas electromagnéticas distribuidos cada 90°, dejando un espacio de 5 mm entre las bobinas y el borde del disco. El disco tiene diez alojamientos para imanes de neodimio de 4×6 mm distribuidos uniformemente en el borde. Añadir soporte para un regulador PWM de 5–12 V, interruptor ON/OFF y una fuente de 12 V. Mostrar vistas superior, lateral, frontal y una vista isométrica explotada con todas las piezas etiquetadas y cotas en milímetros
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 200 mm | 50 – 500 |
| Base width | 200 mm | 50 – 500 |
| Base thickness | 10 mm | 5 – 30 |
| Shaft diameter | 3 mm | 1 – 10 |
| Shaft length | 200 mm | 50 – 400 |
| Bearing ID | 3 mm | 1 – 10 |
| Bearing OD | 8 mm | 3 – 20 |
| Bearing width | 4 mm | 1 – 10 |
| Disc diameter | 200 mm | 50 – 500 |
| Disc thickness | 4 mm | 1 – 10 |
| Disc bottom height above base | 50 mm | 20 – 100 |
| Motor length | 30 mm | 10 – 80 |
| Motor width | 15 mm | 5 – 40 |
| Motor height | 15 mm | 5 – 40 |
| Coupler length | 15 mm | 5 – 30 |
| Support length (height) | 30 mm | 10 – 60 |
| Support width (tangential) | 20 mm | 5 – 40 |
| Support thickness (radial) | 5 mm | 1 – 10 |
| Support gap to disc edge | 5 mm | 1 – 15 |
| Coil diameter | 20 mm | 5 – 50 |
| Coil height (radial length) | 10 mm | 2 – 30 |
| Magnet diameter | 4 mm | 1 – 10 |
| Magnet height | 6 mm | 1 – 10 |
| Number of magnets | 10 | 1 – 20 |
| PWM length | 50 mm | 20 – 100 |
| PWM width | 30 mm | 10 – 60 |
| PWM height | 20 mm | 5 – 40 |
| Switch length | 15 mm | 5 – 30 |
| Switch width | 10 mm | 5 – 20 |
| Switch height | 10 mm | 5 – 20 |
| Power supply length | 80 mm | 30 – 150 |
| Power supply width | 40 mm | 20 – 80 |
| Power supply height | 30 mm | 10 – 50 |
| Layout gap | 50 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con