Gears and transmission
Cylindrical Pan Axis Housing Assembly
- Bounding box
- 232.0 × 226.0 × 187.1 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise parametric cylindrical pan axis housing. Diameter 220 mm, height 160 mm. Use a central vertical shaft and one large circular bearing. Add a lower mounting plate for a 28 mm Junior Spigot and an upper rotating plate. Include a motor mounting bracket and a large timing belt pulley around the central shaft. Aluminum housing, steel shaft. Keep all dimensions parametric.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Diameter | 220 mm | 150 – 300 |
| Housing Height | 160 mm | 100 – 250 |
| Wall Thickness | 10 mm | 5 – 20 |
| Shaft Diameter | 30 mm | 20 – 50 |
| Bearing Outer Diameter | 100 mm | 80 – 150 |
| Bearing Inner Diameter | 50 mm | 30 – 80 |
| Bearing Width | 20 mm | 10 – 40 |
| Lower Plate Thickness | 15 mm | 10 – 25 |
| Upper Plate Thickness | 12 mm | 8 – 20 |
| Spigot Hole Diameter | 28 mm | 20 – 40 |
| Bracket Length | 120 mm | 80 – 200 |
| Bracket Width | 80 mm | 50 – 150 |
| Bracket Thickness | 8 mm | 5 – 15 |
| Pulley Pitch Diameter | 80 mm | 50 – 120 |
| Pulley Width | 20 mm | 10 – 40 |
| Pulley Hub Diameter | 40 mm | 30 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a