Gears and transmission
Cylindrical Pan Axis Housing Assembly
- Bounding box
- 292.6 × 220.1 × 300.1 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise parametric cylindrical pan axis housing. Diameter 220 mm, height 160 mm. Use a central vertical shaft and one large circular bearing. Add a lower mounting plate for a 28 mm Junior Spigot and an upper rotating plate. Include a motor mounting bracket and a large timing belt pulley around the central shaft. Aluminum housing, steel shaft. Keep all dimensions parametric.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Diameter | 220 mm | 100 – 300 |
| Housing Height | 160 mm | 80 – 250 |
| Wall Thickness | 10 mm | 5 – 20 |
| Shaft Diameter | 40 mm | 20 – 60 |
| Shaft Length | 300 mm | 200 – 400 |
| Bearing Outer Diameter | 120 mm | 80 – 180 |
| Bearing Inner Diameter | 40 mm | 20 – 60 |
| Bearing Width | 29 mm | 15 – 50 |
| Lower Plate Diameter | 180 mm | 100 – 250 |
| Lower Plate Thickness | 15 mm | 8 – 25 |
| Spigot Hole Diameter | 28 mm | 20 – 40 |
| Upper Plate Diameter | 200 mm | 120 – 280 |
| Upper Plate Thickness | 12 mm | 6 – 20 |
| Bracket Length | 80 mm | 50 – 120 |
| Bracket Height | 60 mm | 40 – 100 |
| Bracket Thickness | 15 mm | 8 – 25 |
| Pulley Outer Diameter | 100 mm | 60 – 150 |
| Pulley Width | 30 mm | 15 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a