Plates and panels
Curved Channel Base Plate
- Bounding box
- 120.0 × 55.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular base plate, 120mm long (X), 55mm wide (Y), 10mm thick (Z), with rounded corners of 3mm radius. Add 2 through-holes of 4.3mm diameter, centered on the Y axis, positioned symmetrically along the X axis at X = +54mm and X = -54mm from the center. On the top face, cut a curved channel following a circular arc: arc length 104mm, arc radius 74.5mm, the arc's center point located below the part (concave side facing up, like a smile shape), centered on the X axis (X=0). The channel cross-section is a semicircle or U-groove, 6.2mm wide and 6.2mm deep, to house a 6mm tube. Add a rectangular window/cutout on the top face directly above the channel, following the same arc, 6mm wide, to allow visibility of the tube from above.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (X) | 120 mm | 50 – 200 |
| Width (Y) | 55 mm | 20 – 100 |
| Thickness (Z) | 10 mm | 3 – 30 |
| Corner Radius | 3 mm | 0 – 10 |
| Hole Diameter | 4.3 mm | 2 – 10 |
| Hole X Offset from Center | 54 mm | 10 – 60 |
| Channel Width | 6.2 mm | 3 – 15 |
| Channel Depth | 6.2 mm | 2 – 15 |
| Channel Arc Radius | 74.5 mm | 50 – 200 |
| Channel Arc Length | 104 mm | 50 – 200 |
| Window Width | 6 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con