Plates and panels
Conveyor Roller Assembly with Side Plates
- Bounding box
- 320.0 × 10.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
The roller should be between the two plates and should fit between them
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 320 mm | 200 – 500 |
| Plate Height | 80 mm | 50 – 150 |
| Plate Thickness | 5 mm | 3 – 10 |
| Bearing Pocket Diameter | 17 mm | 8 – 30 |
| Idler Slot Length | 30 mm | 10 – 80 |
| Idler Slot Width | 17 mm | 8 – 40 |
| Bearing Edge Distance | 20 mm | 10 – 80 |
| Slot Center Edge Distance | 20 mm | 10 – 80 |
| Motor Mount Hole Diameter | 4 mm | 2 – 10 |
| Motor Hole Spacing X | 15 mm | 5 – 40 |
| Motor Hole Spacing Z | 15 mm | 5 – 40 |
| Sensor Mount Hole Diameter | 3.2 mm | 2 – 10 |
| Sensor Hole Spacing Z | 15 mm | 5 – 40 |
| Sensor Hole Offset X | 20 mm | 5 – 60 |
| Roller Outer Diameter | 40 mm | 20 – 100 |
| Roller Length | 70 mm | 30 – 200 |
| Roller Bore Diameter | 6 mm | 3 – 20 |
| Grub Screw Hole Diameter | 3 mm | 2 – 8 |
| Grub Screw Edge Offset | 8 mm | 3 – 30 |
| Assembly Clearance | 0.5 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service