Plates and panels
Concept C – Belleville slip clutch (preliminary, unverified)
- Bounding box
- 120.0 × 120.0 × 65.0 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Concept C friction slip clutch: Belleville spring preload, axially compliant pressure plate, replaceable annular friction cartridge, threaded preload adjuster, 25 mm bore, max OD 120, max length 70. Separate editable parametric parts, concentric assembly along Z.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing OD | 120 mm | 100 – 120 |
| Housing bore (pressure plate / thread zone) | 100 mm | 90 – 110 |
| Back wall / drive plate thickness | 10 mm | 6 – 16 |
| Housing length | 58 mm | 50 – 66 |
| Drive slot depth | 3 mm | 2 – 5 |
| Pressure plate drive lugs | 6 count | 3 – 8 |
| Drive lug width | 10 mm | 6 – 14 |
| Input flange bolts | 6 count | 4 – 8 |
| Input flange bolt PCD | 108 mm | 100 – 112 |
| Input flange bolt hole | 6.6 mm | 4.5 – 9 |
| Adjuster lock screw (tap drill, M6) | 5 mm | 3 – 6 |
| Hub bore | 25 mm | 20 – 30 |
| Hub journal diameter (bush ID) | 38 mm | 32 – 42 |
| Hub body / spring guide diameter | 44 mm | 38 – 45 |
| Hub rear end z | -6 mm | -12 – -2 |
| Hub front end z | 59 mm | 56 – 64 |
| Front journal start z | 40 mm | 36 – 42 |
| Hub drive lug tip diameter | 50 mm | 46 – 54 |
| Hub drive lugs | 8 count | 4 – 12 |
| Hub lug width | 6 mm | 4 – 9 |
| Keyway width | 8 mm | 6 – 10 |
| Keyway size across bore (d + t2) | 28.3 mm | 26 – 30 |
| Circlip groove diameter (check DIN 471) | 35.7 mm | 33 – 37 |
| Circlip thickness | 1.75 mm | 1 – 2.5 |
| Circlip OD (installed) | 44 mm | 40 – 46 |
| Plain bush OD | 42 mm | 38 – 46 |
| Front bush length | 8 mm | 6 – 12 |
| Release gap per side | 0.5 mm | 0.2 – 1.5 |
| Carrier thickness | 3 mm | 2 – 5 |
| Lining thickness (each side) | 2.5 mm | 1.5 – 4 |
| Lining inner diameter | 60 mm | 50 – 70 |
| Lining outer diameter | 96 mm | 80 – 98 |
| Pressure plate thickness | 8 mm | 5 – 14 |
| Pressure plate OD | 98 mm | 80 – 99 |
| Pressure plate ID | 56 mm | 52 – 70 |
| Spring seat thickness | 3 mm | 2 – 6 |
| Belleville OD (placeholder) | 90 mm | 70 – 96 |
| Belleville ID (placeholder) | 46 mm | 45 – 60 |
| Belleville thickness (placeholder) | 3 mm | 1.5 – 5 |
| Belleville cone height h0 (placeholder) | 1.2 mm | 0.5 – 2.5 |
| Deflection per spring (preload setting) | 0.7 mm | 0.2 – 0.9 |
| Springs in series | 4 count | 2 – 6 |
| Adjuster nut thickness | 12 mm | 8 – 16 |
| Adjuster nut modelled OD (thread cosmetic) | 99.6 mm | 88 – 99.8 |
| Spanner pin hole diameter | 5 mm | 3 – 8 |
| Spanner pin hole PCD | 72 mm | 56 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service