Gears and transmission
Compressor Belt Guard Cage
- Bounding box
- 240 × 96 × 207.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a steel mesh or wire cage to mount to this compressor as a pulley belt cage
Parameters
| Name | Value | Range |
|---|---|---|
| Cage length along the belt run | 220 mm | 140 – 400 |
| Cage height | 190 mm | 100 – 320 |
| Cage depth across the pulleys | 62 mm | 40 – 140 |
| Outline corner radius | 34 mm | 10 – 80 |
| Cage wire diameter | 4.5 mm | 3 – 6 |
| Spacing of the vertical mesh wires | 36 mm | 20 – 80 |
| Distance between foot centres | 130 mm | 60 – 300 |
| Foot length front to back | 86 mm | 40 – 160 |
| Foot width | 46 mm | 24 – 100 |
| Foot height | 8 mm | 4 – 16 |
| M4 clearance hole | 4.5 mm | 3.4 – 6 |
| Bracket plate length | 240 mm | 120 – 360 |
| Bracket plate width | 96 mm | 60 – 200 |
| Bracket plate thickness | 8 mm | 5 – 14 |
| Deck bolt spacing, lengthwise | 98 mm | 40 – 160 |
| Deck bolt spacing, widthwise | 34 mm | 20 – 80 |
| M6 clearance hole | 6.6 mm | 3.4 – 9 |
| M4 nut pocket across flats | 7.4 mm | 6.5 – 9 |
| M4 nut pocket depth | 3.6 mm | 3 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
