Gears and transmission
Compound Gear - 50T Helical + 10T Spur
- Bounding box
- 104.0 × 104.0 × 45.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
design a compound gear with 2 gears, one with 50 teeth and helical, the other with 10 teeth normal
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 2 mm | 1 – 4 |
| Teeth on the large helical gear | 50 mm | 20 – 80 |
| Teeth on the small spur gear | 10 mm | 10 – 24 |
| Helix angle of the large gear | 20 deg | 0 – 35 |
| Face width of the large gear | 20 mm | 8 – 40 |
| Face width of the small gear | 15 mm | 6 – 30 |
| Common shaft bore | 8 mm | 3 – 20 |
| Large gear hub diameter | 34 mm | 14 – 80 |
| Large gear hub height | 28 mm | 10 – 60 |
| Small gear hub diameter | 14 mm | 10 – 15 |
| Small hub above the tooth face | 2.5 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
