Gears and transmission
Combat Robot Wedge + Lifter (Exploded)
- Bounding box
- 5760 × 378 × 90 mm
- Engine
- 3D Printing B-rep
- Parameters
- 36
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional, competition-ready 3D CAD model of a high-performance 4WD combat robot for a college RoboWar competition. Robot Concept: Low-profile Wedge + Front Lifter Combat Robot. Design Requirements: 1. Chassis: - Compact rectangular chassis with a low centre of gravity. - Strong steel or aluminium alloy frame. - Reinforced corners and protected internal components. - Modular chassis with removable top armour. 2. Drive System: - Four-wheel independent drive system. - Two motors on each side using a suitable drivetrain. - High-traction rubber wheels. - Protected motors and gearboxes. 3. Front Weapon System: - Wide, low-angle front wedge. - Mechanically actuated front lifting arm. - Reinforced hinge and mounting points. - Design the lifter to lift and destabilize opposing robots. - Include mechanical travel limits and protected moving parts. 4. Armour: - Sloped front armour. - Reinforced side and rear protection. - Protect the battery, motor controllers and receiver. - Avoid unnecessary weight. 5. Electronics Layout: - Dedicated space for battery. - Motor driver mounting area. - RC receiver mounting area. - Emergency power disconnect access. - Proper cable routing and ventilation. 6. CAD Modelling: - Create a complete 3D assembly. - Show individual components separately. - Include front, rear, side, top and isometric views. - Provide exploded assembly view. - Include dimensions, mounting holes and fastener locations. - Make the design manufacturable using standard workshop tools. Performance Priorities: - High traction. - Excellent pushing capability. - Strong structural integrity. - Fast turning and manoeuvrability. - Resistance to impacts. - Reliable operation throughout the competition. The final design should look like a professional engineering-grade combat robot, not a toy. Prioritize practical construction, repairability, weight optimization and competition safety. Do not include projectiles, flames or exposed hazardous mechanisms.
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between part centres along X | 520 mm | 300 – 800 |
| Overall length | 420 mm | 300 – 600 |
| Overall width | 300 mm | 200 – 450 |
| Frame height | 70 mm | 40 – 150 |
| Wall thickness | 5 mm | 3 – 10 |
| Floor thickness | 8 mm | 4 – 15 |
| Plate length | 410 mm | 300 – 600 |
| Plate width | 290 mm | 200 – 450 |
| Plate thickness | 3 mm | 2 – 8 |
| Number of ventilation slots | 6 mm | 2 – 12 |
| Wedge width | 300 mm | 150 – 420 |
| Wedge depth | 120 mm | 60 – 250 |
| Max wedge height | 25 mm | 10 – 80 |
| Approach angle | 15 deg | 5 – 45 |
| Arm width | 280 mm | 150 – 400 |
| Arm length | 80 mm | 40 – 200 |
| Arm plate thickness | 8 mm | 4 – 20 |
| Wheel diameter | 80 mm | 40 – 150 |
| Wheel width | 30 mm | 15 – 60 |
| Gearmotor body diameter | 28 mm | 15 – 50 |
| Battery length | 150 mm | 80 – 250 |
| Battery width | 50 mm | 30 – 120 |
| Battery height | 30 mm | 15 – 60 |
| ESC plate length | 200 mm | 100 – 300 |
| ESC plate width | 120 mm | 60 – 200 |
| ESC length | 60 mm | 30 – 100 |
| ESC width | 40 mm | 20 – 80 |
| ESC height | 15 mm | 8 – 40 |
| Receiver length | 40 mm | 20 – 80 |
| Receiver width | 25 mm | 15 – 60 |
| Receiver height | 15 mm | 8 – 40 |
| Tray length | 200 mm | 100 – 300 |
| Tray width | 120 mm | 60 – 200 |
| Disconnect length | 40 mm | 20 – 80 |
| Disconnect width | 30 mm | 15 – 60 |
| Disconnect height | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
