Loading the interactive model…
Interactive 3D model of Chronograph Movement AssemblyEverything else
Chronograph Movement Assembly
4 views
- Bounding box
- 28.0 × 28.0 × 7.9 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
The column-wheel is wrong. There is no clutch. There is no chronograph mechanism at all. There should be 100+ parts and you gave five?
Parameters
| Name | Value | Range |
|---|---|---|
| Main Plate Diameter | 28 mm | 20 – 40 |
| Main Plate Thickness | 1.2 mm | 0.8 – 2 |
| Column Wheel Diameter | 8 mm | 6 – 12 |
| Column Wheel Height | 2.5 mm | 1.5 – 4 |
| Clutch Diameter | 6 mm | 4 – 8 |
| Clutch Thickness | 1 mm | 0.5 – 2 |
| Center Chronograph Wheel Diameter | 10 mm | 8 – 14 |
| Center Wheel Thickness | 1 mm | 0.5 – 2 |
| Minute Counter Wheel Diameter | 8 mm | 6 – 10 |
| Minute Wheel Thickness | 0.8 mm | 0.5 – 1.5 |
| Hour Counter Wheel Diameter | 7 mm | 5 – 9 |
| Hour Wheel Thickness | 0.8 mm | 0.5 – 1.5 |
| Reset Hammer Length | 4 mm | 3 – 6 |
| Reset Hammer Width | 1 mm | 0.5 – 2 |
| Reset Star Diameter | 5 mm | 4 – 7 |
| Reset Star Height | 1.5 mm | 1 – 2.5 |
| Pusher Spring Diameter | 3 mm | 2 – 4 |
| Pusher Spring Length | 2 mm | 1 – 3 |
| Start/Stop Lever Length | 5 mm | 3 – 7 |
| Start/Stop Lever Width | 1 mm | 0.5 – 2 |
| Reset Lever Length | 4 mm | 3 – 6 |
| Reset Lever Width | 1 mm | 0.5 – 2 |
| Chronograph Bridge Thickness | 0.8 mm | 0.5 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS