Plates and panels
Central Intermediate Disc
- Bounding box
- 90.0 × 90.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
Part C: Central (Intermediate) Disc Step 1 — Web New Part → sketch on the Front Plane a circle ⌀90 at the origin. Extrude: End Condition Mid Plane, depth 15 mm. Using Mid Plane keeps the disc symmetric about the Front Plane, which makes the two tongues easy to control. Step 2 — Tongue A (front face) Select the front face of the web → Sketch. Draw a rectangle 15 mm wide × 90 mm long, symmetric about the vertical centre line and centred on the origin. Extruded Boss: Blind, 10 mm. Step 3 — Tongue B (back face) Select the back face of the web → Sketch. Draw the same rectangle but rotated 90° — 15 mm wide, symmetric about the horizontal centre line. Extruded Boss: Blind, 10 mm. Overall thickness of the disc is now 10 + 15 + 10 = 35 mm. Check: view the part from the front and press Ctrl+8 (Normal To). Toggle to a wireframe display — the two tongues must appear as a cross at exactly 90°. Use Tools → Evaluate → Measure to confirm the angle between the two tongue faces.
Parameters
| Name | Value | Range |
|---|---|---|
| Web Diameter | 90 mm | 40 – 120 |
| Web Thickness | 15 mm | 5 – 30 |
| Tongue Width | 15 mm | 5 – 40 |
| Tongue Length | 90 mm | 50 – 150 |
| Tongue Protrusion | 10 mm | 2 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,