Plates and panels
Cast Metal Worker Figurine with Ingot
- Bounding box
- 80.0 × 60.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
“A cast metal figurine of a worker standing upright on a rectangular base plate. The worker is wearing a work jacket and trousers, with both arms raised straight up above the head, holding a large rectangular block (ingot/brick) horizontally with both hands. The base plate is a flat rectangular slab approximately 60mm x 60mm x 15mm. The total height of the figurine including the base is approximately 170mm. The figure has a rough cast metal texture. The block held above the head is approximately 80mm wide, 30mm deep, and 20mm thick. The worker’s body is stylized and simplified, with visible arms, torso, legs, and boots. The pose is symmetrical with arms forming an inverted V shape supporting the block
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width (X) | 60 mm | 40 – 120 |
| Base Depth (Y) | 60 mm | 40 – 120 |
| Base Thickness | 15 mm | 5 – 40 |
| Overall Height (incl. block) | 170 mm | 120 – 300 |
| Figure Height (base top to head top) | 132 mm | 80 – 250 |
| Ingot Width | 80 mm | 40 – 200 |
| Ingot Depth | 30 mm | 15 – 100 |
| Ingot Thickness | 20 mm | 8 – 60 |
| Shoulder Width | 40 mm | 20 – 80 |
| Torso Depth | 25 mm | 12 – 60 |
| Head Diameter | 19 mm | 10 – 40 |
| Arm Diameter | 12 mm | 6 – 30 |
| Leg Diameter | 15 mm | 8 – 35 |
| Boot Length | 24 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec