cabinet_assembly_with_handle_and_internals

1 views

Bounding box: 400.1 × 558.0 × 220.0 mm
Engine: Precision B-rep
Parameters: 128
Published: October 5, 2026

Download

Free to download and use. See the terms.

The prompt

Create two CAD bodies. Units: mm. Global coordinates: origin at the front-bottom-left outer corner of the closed cabinet, +X right, +Y up, +Z toward the rear (top panel outer face at Y=500). Model in place. 1) carrying_handle: U-shaped carry handle, Ø10 round bar. Vertical legs at X 135 and X 265, Z 100 (clear grip width 120 mm between legs). Horizontal grip bar with underside at Y 548 and top at Y 558 (48 mm finger clearance above the top panel). R12 bends at both upper corners. Each leg ends in a 3 mm thick foot plate, 30 (X) x 40 (Z), centered on the leg at Y 500-503, with two Ø5.5 holes at Z 88 and Z 112, plus two 15 x 15 mm triangular 3 mm gussets per foot. 2) handle_backing_plate: 200 (X 100-300) x 60 (Z 70-130) x 3 mm (Y 495.5-498.5) with four Ø5.5 holes aligned to the foot holes. Create six labeled CAD bodies. Units: mm. Global coordinates: origin at the front-bottom-left outer corner of the closed cabinet, +X right, +Y up, +Z toward the rear. Interior is X 1.5-398.5, Y 1.5-498.5, Z 3.5-198.5. Model in place. 1) electronics_shelf: full-width 1.5 mm plate, X 1.5-398.5, Y 322-323.5, Z 3.5-198.5, no holes, with 10 mm tall x 1.5 mm thick support flanges folded UP along the left, right and rear edges (Y 323.5-333.5). 2) kit_dividers_and_lip: one body made of: dividers 2.5 mm thick, Y 1.5-322, Z 6-198.5, at X 98.875-101.375 and X 198.75-201.25; a third divider at X 298.625-301.125 with a lock-relief notch (remove Y 205-275, Z 6-42, so it starts at Z 42 there); and a 2 mm thick front lip, X 1.5-398.5, Y 1.5-29.5, Z 4-6. 3-6) kit_bay_1..kit_bay_4: four translucent keep-out blocks, each Y 1.5-322, Z 6-198.5, at X 1.5-98.875, 101.375-198.75, 201.25-298.625, 301.125-398.5 (each 97.375 mm wide). Cut relief notches: kit_bay_1 loses X 1.5-16, Y 75-135, Z 6-12 (hinge); kit_bay_3 loses X 290-298.625, Y 205-275, Z 6-42 and kit_bay_4 loses X 301.125-330, Y 205-275, Z 6-42 (lock).

Parameters

Name	Value	Range
Shell Width	400 mm	100 – 800
Shell Height	500 mm	100 – 800
Shell Depth (rear)	196.5 mm	50 – 400
Wall Thickness	1.5 mm	0.5 – 5
Front Gap (door + gasket)	3.5 mm	1 – 10
Top Hole Diameter	5.5 mm	2 – 20
Top Hole X Position	135 mm	10 – 390
Top Hole Z Low	88 mm	1 – 200
Top Hole Z High	112 mm	1 – 200
Louver Y Min	336 mm	0 – 500
Louver Y Max	358 mm	0 – 500
Louver Z Min	50 mm	0 – 200
Louver Z Max	130 mm	0 – 200
Louver Blade Angle	35 deg	0 – 80
Louver Blade Count	5	1 – 20
Side Hole Y	372 mm	0 – 500
Side Hole Z	130 mm	0 – 200
Side Hole Diameter	12 mm	1 – 50
Door Thickness	1.5 mm	0.5 – 5
LCD Center X	140 mm	0 – 400
LCD Center Y	406 mm	0 – 500
LCD Width	224 mm	10 – 300
LCD Height	127 mm	10 – 300
LCD Corner Radius	2 mm	0.5 – 10
Camera Hole Center X	295 mm	0 – 400
Camera Hole Center Y	406 mm	0 – 500
Camera Hole Diameter	10 mm	1 – 50
Fan Center X	358 mm	0 – 400
Fan Center Y	406 mm	0 – 500
Fan Opening Diameter	38 mm	10 – 100
Fan Slot Count	7	1 – 30
Fan Slot Height	2 mm	0.5 – 5
Fan Slot Pitch	4.5 mm	1 – 20
Fan Bolt X Offset	16 mm	1 – 40
Fan Bolt Y Offset	16 mm	1 – 40
Fan Bolt Hole Dia	3.4 mm	1 – 10
Lock Hole Center X	310 mm	0 – 400
Lock Hole Center Y	240 mm	0 – 500
Lock Hole Diameter	22 mm	1 – 80
Gasket Thickness	2 mm	0.5 – 5
Gasket Width	5 mm	1 – 20
Gasket Edge Inset	0.5 mm	0 – 5
Hinge X Min	3 mm	0 – 50
Hinge X Max	15 mm	0 – 50
Hinge Y Length	50 mm	10 – 100
Hinge Z Start	1.5 mm	0 – 20
Hinge Depth	10 mm	2 – 30
Hinge 1 Y Position	80 mm	0 – 500
Hinge 2 Y Position	370 mm	0 – 500
Swing Handle Center X	310 mm	0 – 400
Swing Handle Width	42 mm	5 – 150
Swing Handle Y Start	180 mm	0 – 400
Swing Handle Height	120 mm	5 – 300
Swing Handle Protrusion	20 mm	1 – 60
Swing Handle Edge Radius	4 mm	0 – 15
Lock Body Size X	30 mm	5 – 80
Lock Body Size Y	50 mm	5 – 100
Lock Body Depth	33.5 mm	5 – 100
Lock Body Center X	310 mm	0 – 400
Lock Body Center Y	240 mm	0 – 500
Carry Handle Left Leg X	135 mm	0 – 400
Carry Handle Right Leg X	265 mm	0 – 400
Carry Handle Leg Z	100 mm	0 – 200
Carry Handle Bar Diameter	10 mm	2 – 30
Carry Handle Bend Radius	12 mm	2 – 50
Carry Handle Grip Y Center	553 mm	500 – 700
Foot Plate X	30 mm	10 – 80
Foot Plate Z	40 mm	10 – 80
Foot Plate Thickness	3 mm	1 – 10
Foot Hole Diameter	5.5 mm	1 – 20
Foot Hole Z Low	88 mm	0 – 200
Foot Hole Z High	112 mm	0 – 200
Gusset Size	15 mm	5 – 40
Gusset Thickness	3 mm	1 – 8
Gusset Z Offset	6 mm	0 – 20
Backing Plate X Min	100 mm	0 – 400
Backing Plate Width	200 mm	20 – 400
Backing Plate Y Min	495.5 mm	0 – 500
Backing Plate Thickness	3 mm	1 – 10
Backing Plate Z Min	70 mm	0 – 200
Backing Plate Height	60 mm	10 – 200
Backing Plate Hole Dia	5.5 mm	1 – 20
Shelf Thickness	1.5 mm	0.5 – 5
Shelf Y Bottom	322 mm	0 – 500
Shelf Flange Height	10 mm	2 – 50
Shelf Flange Thickness	1.5 mm	0.5 – 5
Divider Thickness	2.5 mm	0.5 – 10
Divider Y Min	1.5 mm	0 – 500
Divider Y Max	322 mm	0 – 500
Divider Z Min	6 mm	0 – 200
Divider Z Max	198.5 mm	0 – 200
Divider 1 X Min	98.88 mm	0 – 400
Divider 1 X Max	101.38 mm	0 – 400
Divider 2 X Min	198.75 mm	0 – 400
Divider 2 X Max	201.25 mm	0 – 400
Divider 3 X Min	298.63 mm	0 – 400
Divider 3 X Max	301.13 mm	0 – 400
Lock Relief Y Min	205 mm	0 – 500
Lock Relief Y Max	275 mm	0 – 500
Lock Relief Z Min	6 mm	0 – 200
Lock Relief Z Max	42 mm	0 – 200
Front Lip Thickness	2 mm	0.5 – 10
Front Lip Y Min	1.5 mm	0 – 500
Front Lip Y Max	29.5 mm	0 – 500
Front Lip Z Min	4 mm	0 – 200
Front Lip Z Max	6 mm	0 – 200
Bay Y Min	1.5 mm	0 – 500
Bay Y Max	322 mm	0 – 500
Bay Z Min	6 mm	0 – 200
Bay Z Max	198.5 mm	0 – 200
Bay 1 X Min	1.5 mm	0 – 400
Bay 1 X Max	98.88 mm	0 – 400
Bay 2 X Min	101.38 mm	0 – 400
Bay 2 X Max	198.75 mm	0 – 400
Bay 3 X Min	201.25 mm	0 – 400
Bay 3 X Max	298.63 mm	0 – 400
Bay 4 X Min	301.13 mm	0 – 400
Bay 4 X Max	398.5 mm	0 – 400
Bay 1 Relief X Min	1.5 mm	0 – 400
Bay 1 Relief X Max	16 mm	0 – 400
Bay Relief Y Min	75 mm	0 – 500
Bay Relief Y Max	135 mm	0 – 500
Bay Relief Z Min	6 mm	0 – 200
Bay Relief Z Max	12 mm	0 – 200
Bay 3 Relief X Min	290 mm	0 – 400
Bay 3 Relief X Max	298.63 mm	0 – 400
Bay 4 Relief X Min	301.13 mm	0 – 400
Bay 4 Relief X Max	330 mm	0 – 400

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

6020.0 × 2200.0 × 6753.0 mmPrecision

Conveyor Belt Assembly

You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100

STEPSTLGLB19 PARAMS

80.0 × 80.0 × 43.0 mmPrecision

3-in-1 Adaptive Jack Head

Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”

STEPSTLGLB11 PARAMS

80.0 × 60.0 × 1.6 mmPrecision

Adjustable Bracket (Laser Cut)

Give a good laser cutting pattern in 1.6mm thickness sheet

STEPSTLGLB8 PARAMS

30.0 × 30.0 × 14.0 mmPrecision

Micro‑Needle Array with Counter‑Bored Port

A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component

STEPSTLGLB13 PARAMS

55.0 × 80.0 × 5.3 mmPrecision

Flat Sheet Metal Plate

Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm

STEPSTLGLB3 PARAMS

90 × 90 × 246.0 mm3D Printing

Orbital Launch Vehicle Display Model

Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service

STLGLB6 PARAMS