Gears and transmission
Black Forest Cuckoo Clock Cafe
- Bounding box
- 144 × 124 × 141.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Redesign the building using TWO separate 20-foot shipping containers as the lower structural base, positioned side by side, matching my original SolidWorks concept. Keep both container structures recognizable, including their corrugated metal walls, corner posts and original container proportions. Build a traditional Black Forest timber chalet structure above and around the containers. ROOF: - Use a symmetrical, relatively flat pitched roof. - The interior angle at the roof ridge should be 110–120 degrees. - Keep the roof wide with generous overhangs. GABLE: - Place ONE small cuckoo-style window exactly in the CENTER of the upper front gable. FRONT FACADE: - One large analog clock centered on the lower façade. - Two bakery serving windows, one on each side of the clock. - Small wooden serving counters below both windows. IMPORTANT: Preserve the two-container construction. Do not replace the lower structure with a conventional solid house.
Parameters
| Name | Value | Range |
|---|---|---|
| Container height | 54 mm | 30 – 90 |
| Gap between containers | 4 mm | 1 – 12 |
| Corrugation relief | 1.2 mm | 0.4 – 3 |
| Corrugation pitch | 8 mm | 4 – 20 |
| Corner post width | 5 mm | 3 – 12 |
| Top / bottom rail height | 4 mm | 2 – 8 |
| Building width | 120 mm | 60 – 200 |
| Building depth | 100 mm | 40 – 150 |
| Eave wall height | 100 mm | 50 – 150 |
| Roof ridge rise above eaves | 38 mm | 20 – 140 |
| Wall thickness | 2.6 mm | 1.2 – 6 |
| Roof slab thickness | 3.5 mm | 2 – 8 |
| Roof overhang | 12 mm | 2 – 20 |
| Clock face diameter | 32 mm | 20 – 70 |
| Clock centre height | 76 mm | 15 – 120 |
| Serving window width | 24 mm | 12 – 60 |
| Serving window height | 24 mm | 10 – 60 |
| Serving window centre height | 76 mm | 15 – 130 |
| Serving window offset from centre | 38 mm | 10 – 90 |
| Serving counter width | 28 mm | 10 – 90 |
| Serving counter depth | 10 mm | 3 – 30 |
| Serving counter thickness | 4 mm | 2 – 10 |
| Timber framing width | 4 mm | 2 – 10 |
| Timber framing relief | 2 mm | 0.6 – 6 |
| Cuckoo door width | 14 mm | 6 – 30 |
| Cuckoo door height | 18 mm | 8 – 30 |
| Cuckoo door offset from centre | 0 mm | -40 – 40 |
| Cuckoo door centre height | 112 mm | 90 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.