Gears and transmission
Belt Conveyor 250 t/h – 40 m + 15 m @15°
- Bounding box
- 57726.8 × 2340.0 × 4975.4 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Belt conveyor model exactly as described in Belt_Conveyor_Design_Project_Solution.docx: crushed limestone, 250 t/h, 40 m horizontal + 15 m inclined at 15°, 650 mm EP400/3 belt, 35° 3-roll troughing idlers (108 mm, 1.2 m spacing), flat return idlers (3.0 m), 400 mm drive pulley with 210° wrap, 315 mm tail pulley, 7.5 kW motor with 20:1 gearbox, tail screw take-up with 600 mm travel.
Parameters
| Name | Value | Range |
|---|---|---|
| Belt width | 650 mm | 500 – 1000 |
| Belt thickness (carcass + covers) | 10 mm | 6 – 20 |
| Troughing angle | 35 deg | 20 – 45 |
| Material half-width on belt | 182 mm | 125 – 230 |
| Surcharge angle | 20 deg | 10 – 30 |
| Horizontal distance | 40000 mm | 10000 – 60000 |
| Inclined distance | 15000 mm | 5000 – 30000 |
| Inclination | 15 deg | 5 – 18 |
| Tail belt height above ground | 1000 mm | 800 – 1500 |
| Idler roll diameter | 108 mm | 89 – 159 |
| Carrying idler spacing | 1200 mm | 800 – 1500 |
| Return idler spacing | 3000 mm | 2000 – 4000 |
| Drive pulley diameter | 400 mm | 315 – 630 |
| Tail pulley diameter | 315 mm | 280 – 500 |
| Snub pulley diameter | 315 mm | 250 – 500 |
| Drive wrap angle | 210 deg | 195 – 240 |
| Pulley face width | 750 mm | 700 – 1000 |
| Drive shaft diameter | 80 mm | 60 – 120 |
| Screw take-up travel | 600 mm | 300 – 900 |
| Motor frame diameter (7.5 kW) | 270 mm | 200 – 350 |
| Motor length | 520 mm | 400 – 700 |
| Gearbox 20:1 body size | 380 mm | 300 – 500 |
| Hopper top length | 1800 mm | 1400 – 2600 |
| Hopper top width | 1100 mm | 900 – 1600 |
| Hopper height | 1200 mm | 800 – 1800 |
| Hopper outlet length | 1200 mm | 800 – 1600 |
| Hopper outlet width | 500 mm | 300 – 520 |
| Skirt board length | 3000 mm | 1500 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
