Beer Olympics Trophy

Create a 305 mm tall championship trophy designed for FDM 3D printing on a Bambu X1C. The trophy has a two-tier circular base (180 mm bottom tier, 145 mm upper tier) with a recessed slide-in plaque slot (110 × 45 mm) on the front and a hidden storage compartment in the underside. Add a 75 mm tall pedestal supporting a classic trophy cup. The cup must contain a cylindrical cavity 68 mm in diameter and 128 mm deep to hold a standard US 12 oz beverage can. Add two traditional trophy handles decorated with hop vines and barley. Create overflowing beer foam as a separate printable body with four drips. Replace Olympic rings with five overlapping beer bottle caps (34 mm diameter each) as separate bodies for multicolor printing. Add raised text "BEER OLYMPICS CHAMPION" on the front plaque area, leaving the year for the removable insert. Split the design into print-friendly components with approximately 3.2 mm wall thickness, alignment pins, and threaded joints where appropriate.

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.