Plates and panels
Base Disc + Top Disc + Knob + Scraper Assembly
- Bounding box
- 174.0 × 100.0 × 36.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Put each part in its own separate file in this project: base disc, top disc, knob, and scraper. Each file should contain only that one part, centered at the origin, not touching the others.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Disc Diameter | 100 mm | 40 – 200 |
| Base Disc Height | 20 mm | 5 – 60 |
| Pocket Diameter | 90 mm | 20 – 190 |
| Pocket Depth | 8 mm | 1 – 40 |
| Bottom Groove OD | 90 mm | 20 – 190 |
| Bottom Groove ID | 78 mm | 10 – 180 |
| Bottom Groove Depth | 1.5 mm | 0.2 – 5 |
| Top Disc Diameter | 89.6 mm | 20 – 190 |
| Top Disc Thickness | 8 mm | 2 – 30 |
| Blind Hole Diameter | 12 mm | 2 – 60 |
| Blind Hole Depth | 6 mm | 1 – 20 |
| Edge Notch Width | 10 mm | 2 – 40 |
| Edge Notch Depth | 3 mm | 0.5 – 15 |
| Knob Cylinder Diameter | 12 mm | 4 – 60 |
| Knob Cylinder Height | 10 mm | 2 – 60 |
| Knob Block Length | 30 mm | 5 – 100 |
| Knob Block Width | 18 mm | 5 – 100 |
| Knob Block Height | 14 mm | 3 – 80 |
| Knob Block Fillet | 4 mm | 0 – 6 |
| Scraper Plate Width | 36 mm | 5 – 120 |
| Scraper Plate Length | 25 mm | 5 – 120 |
| Scraper Plate Thickness | 2 mm | 0.5 – 20 |
| Scraper Notch Width | 3 mm | 0.5 – 20 |
| Scraper Notch Depth | 2 mm | 0.2 – 10 |
| Handle Length | 45 mm | 5 – 150 |
| Handle Width | 16 mm | 3 – 100 |
| Handle Thickness | 10 mm | 1 – 60 |
| Handle Fillet | 3 mm | 0 – 4 |
| Top Disc Seat Overlap | 1 mm | 0.2 – 3 |
| Knob Tip Penetration | 1 mm | 0.2 – 1.5 |
| Scraper Handle Embed | 4 mm | 1 – 8 |
| Scraper Mount Height | 10 mm | 2 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service