Plates and panels
Assembled Disc with Center Screw and Three Magnets
- Bounding box
- 100.0 × 100.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 18, 2026
Download
Free to download and use. See the terms.
The prompt
a round 2 cm depth disc with a hole for a center screw 5 mm the radius is 5 cm. the center screw sits in a cross because water has to flow around it. on the top of the outer ring are 3 magnets with 5 mm diameter and 3 mm depth included
Parameters
| Name | Value | Range |
|---|---|---|
| Disc radius | 50 mm | 20 – 150 |
| Disc thickness | 20 mm | 5 – 60 |
| Center screw hole diameter | 5 mm | 3 – 12 |
| Cross recess width | 10 mm | 6 – 20 |
| Cross recess length | 30 mm | 20 – 80 |
| Cross recess depth | 4 mm | 2 – 10 |
| Magnet pocket diameter | 5 mm | 3 – 12 |
| Magnet pocket depth | 3 mm | 1 – 8 |
| Magnet pocket center radius | 40 mm | 20 – 60 |
| Screw shank diameter | 5 mm | 3 – 12 |
| Screw length (under head) | 25 mm | 15 – 45 |
| Screw head diameter | 9 mm | 5 – 16 |
| Screw head height | 3 mm | 1 – 6 |
| Magnet diameter | 5 mm | 3 – 12 |
| Magnet height | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con