Loading the interactive model…
Interactive 3D model of ASRS Stacker Crane (lattice mast)Everything else
ASRS Stacker Crane (lattice mast)
27 views
- Bounding box
- 2600.0 × 1270.0 × 3400.0 mm
- Engine
- Precision B-rep
- Parameters
- 54
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
refer attached,generate again
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 2600 mm | 1500 – 4000 |
| Overall width | 700 mm | 400 – 1200 |
| Overall height | 3400 mm | 2000 – 5000 |
| Rail flange width | 120 mm | 60 – 250 |
| Rail height | 90 mm | 40 – 200 |
| Rail flange thickness | 12 mm | 5 – 30 |
| Rail web width | 16 mm | 6 – 40 |
| Base length | 1400 mm | 600 – 2500 |
| Base width | 400 mm | 200 – 900 |
| Base thickness | 120 mm | 40 – 300 |
| Base height above floor | 185 mm | 60 – 500 |
| Caster diameter | 100 mm | 40 – 250 |
| Caster thickness | 40 mm | 10 – 100 |
| Caster rail overlap | 3 mm | 0 – 20 |
| Caster inset from base end | 200 mm | 50 – 600 |
| Caster sideways spacing | 110 mm | 40 – 400 |
| Drive motor diameter | 110 mm | 40 – 250 |
| Drive motor length | 260 mm | 80 – 600 |
| Head beam height | 220 mm | 80 – 500 |
| Mast column spacing | 300 mm | 100 – 700 |
| Mast column width (X) | 40 mm | 15 – 120 |
| Mast column depth (Y) | 60 mm | 20 – 200 |
| Mast foot block height | 120 mm | 20 – 400 |
| Lattice rung section | 24 mm | 8 – 80 |
| Rung pitch | 260 mm | 100 – 600 |
| First rung above base | 340 mm | 100 – 900 |
| Top rung margin | 300 mm | 100 – 900 |
| Diagonal brace section | 16 mm | 5 – 60 |
| Head beam span | 460 mm | 200 – 1000 |
| Head beam depth | 200 mm | 80 – 500 |
| Sheave diameter | 160 mm | 40 – 400 |
| Sheave width | 40 mm | 10 – 150 |
| Sheave spacing (X) | 140 mm | 40 – 400 |
| Sheave offset (Y) | 60 mm | 0 – 200 |
| Carriage width | 340 mm | 100 – 800 |
| Carriage height | 320 mm | 80 – 800 |
| Carriage depth | 260 mm | 80 – 600 |
| Carriage center height | 1200 mm | 400 – 3000 |
| Carriage offset (Y) | 150 mm | 0 – 400 |
| Fork tine length | 900 mm | 200 – 2000 |
| Fork tine width | 110 mm | 30 – 300 |
| Fork tine thickness | 40 mm | 10 – 120 |
| Fork tine gap | 30 mm | 5 – 200 |
| Fork root offset (Y) | 270 mm | 0 – 600 |
| Fork height | 1100 mm | 300 – 3000 |
| Cabinet length | 380 mm | 100 – 900 |
| Cabinet depth | 260 mm | 80 – 600 |
| Cabinet height | 900 mm | 200 – 2000 |
| First vent height | 700 mm | 100 – 1500 |
| Lifting belt count | 4 pcs | 2 – 8 |
| Belt width | 30 mm | 5 – 80 |
| Belt thickness | 12 mm | 2 – 40 |
| Belt offset (Y) | 80 mm | 0 – 300 |
| Belt spacing (X) | 140 mm | 40 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS