Gears and transmission
ArduRover car v1 (splash-proof)
- Bounding box
- 290.0 × 200.0 × 101.5 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
3D-printed ArduRover RC car: rear drive with a 9.4:1 printed gearbox for a 3536 motor, servo steering, sealed electronics box and gear hood (splash-proof). Body is a separate model.
Parameters
| Name | Value | Range |
|---|---|---|
| Pinion bore (prop thread) | 5.2 mm | 4 – 8 |
| Motor face to prop-adapter shoulder | 16 mm | 12 – 20 |
| Gear backlash | 0.15 mm | 0 – 0.4 |
| 608 bearing pocket diameter | 22.15 mm | 21.9 – 22.5 |
| Electronics box wall height | 38 mm | 25 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.