Gears and transmission
Arc-Face Gear Pair
- Bounding box
- 1083.7 × 701.4 × 50.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Two gears, A and B, have a center-to-center distance of 20 in. Gear A rotates at 100 rpm and has 16 teeth. Gear B rotates at 160 rpm. The teeth on the gear A are formed as follows: The face is a circle are whose radius is 4½ in. and whose center is ½in. inside of the pitch circle. The flank is radial. The length of adden-dum is 1½in.; the dedendum 2 in. a. Find the curves forming the tooth on the gear B. b. Draw the path of contact if A is the driver and rotates counterclockwise. c. Draw two full teeth on each gear, allowing 0.1 in. backlash. Dimension the gears and teeth. d. Show complete construction for one point on the flank and one point on the face of curve B. Use letters on construction to indicate fully the construction. Scale: Full size.
Parameters
| Name | Value | Range |
|---|---|---|
| Center-to-center distance | 508 mm | 400 – 800 |
| Face width / thickness | 50.8 mm | 10 – 100 |
| Addendum | 38.1 mm | 5 – 60 |
| Dedendum | 50.8 mm | 5 – 70 |
| Backlash allowance | 2.54 mm | 0 – 5 |
| Gear A tooth count | 16 mm | 8 – 30 |
| Gear A shaft bore | 50.8 mm | 10 – 120 |
| Gear B tooth count | 10 mm | 6 – 24 |
| Gear B shaft bore | 38.1 mm | 8 – 100 |
| Circular-arc face radius | 114.3 mm | 20 – 300 |
| Arc centre inset from pitch circle | 12.7 mm | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
