Plates and panels
Aquarium Cabinet with Paired Internal Posts
- Bounding box
- 1200.0 × 845.1 × 800.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing 3D model of the aquarium cabinet frame: 1. Remove the current single-line internal vertical posts. 2. Replace them with two full pairs of vertical posts dividing the 3 vertical compartments: - One pair (two parallel vertical posts) at the front. - One second pair (two parallel vertical posts) at the back, aligned directly behind the front pair. 3. Keep the 1200mm width, 500mm depth, and 800mm height overall dimensions, along with the top countertop, bottom base plates, and the narrow middle shelving section supported by these new front-and-back vertical posts.
Parameters
| Name | Value | Range |
|---|---|---|
| Cabinet Width | 1200 mm | 600 – 1800 |
| Cabinet Depth | 500 mm | 300 – 900 |
| Aluminum Profile Size | 40 mm | 20 – 80 |
| Vertical Post Height (between rails) | 700 mm | 400 – 1000 |
| Countertop Thickness | 20 mm | 10 – 50 |
| Floor Panel Thickness | 18 mm | 10 – 30 |
| Left Compartment Width | 470 mm | 300 – 700 |
| Middle Compartment Width | 180 mm | 100 – 400 |
| Right Compartment Width | 470 mm | 300 – 700 |
| Cross Brace Length | 420 mm | 100 – 480 |
| Door Height | 682 mm | 400 – 900 |
| Door Thickness | 18 mm | 10 – 30 |
| Door Open Angle | 45 deg | 0 – 90 |
| Hinge Inset | 20 mm | 0 – 100 |
| Number of Shelves | 3 | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service