Aquarium Breeding Box

Create a parametric 3D printable open-top external breeding box for an aquarium with the following exact dimensions and features in millimeters. 1. Main Box Body: - Outer dimensions: Width 150mm, Length 150mm, Height 100mm. - Wall thickness: 3mm for all external walls. 2. Hanging Ledge (Gờ treo): - On the back wall, add an external rectangular hanging hook (ledge). - The hook opening width must be exactly 8mm to fit the aquarium glass thickness. - The hook downward lip length should be 20mm. 3. Pump Compartment (Hộp máy bơm): - Located inside the main box, at the upper-left corner. - Create a sealed, enclosed inner chamber isolating the water pump. - Chamber inner size: 50mm x 50mm, extending from the bottom to the top. - At the top wall/lid of this pump chamber, place a single circular hole with a diameter of 12mm for cable/pipe routing. 4. Waterfall Outlet (Thác nước): - Located on the front wall, at the upper-right section. - Create a rectangular cut-out spillway (weir) for a waterfall flow. - The cut-out dimensions: 60mm wide and 15mm deep from the top rim. - Extend a short 10mm lip protruding outward horizontally from the bottom of this cut-out to guide the water down like a waterfall. Export the final validated solid geometry model as a 3D-printable STL file.

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.