Angled Tool Holder with Open Front and Side-Clamped Sliding Jaw

1 views

Bounding box: 60.0 × 80.0 × 50.0 mm
Engine: Precision B-rep
Parameters: 31
Published: September 12, 2026

Download

Free to download and use. See the terms.

The prompt

slight change lets make the frunt more opne and have the locking skrews on the side and then lets add the moving meconisom

Parameters

Name	Value	Range
Body Width	60 mm	30 – 140
Body Depth	40 mm	20 – 100
Body Height	50 mm	20 – 120
V-Groove Angle	90 deg	30 – 130
V-Groove Depth	10 mm	2 – 25
Nose Angle	45 deg	10 – 80
Nose Length	12 mm	2 – 30
Pivot Bore Dia	8 mm	3 – 20
Pivot Y Position	10 mm	4 – 35
Pivot Z Position	12 mm	5 – 40
Tilt Arc Radius	12 mm	5 – 30
Tilt Arc Slot Width	6 mm	2 – 12
Tilt Range	30 deg	5 – 90
Platform Length	40 mm	15 – 120
Platform Width	40 mm	15 – 100
Platform Thickness	8 mm	3 – 25
Platform Height	10 mm	0 – 40
Side Rail Thickness	6 mm	2 – 15
Side Rail Height	15 mm	3 – 60
Front Lip Thickness	6 mm	2 – 15
Front Lip Height	4 mm	0 – 30
Jaw Width	18 mm	6 – 60
Jaw Length	24 mm	8 – 80
Jaw Height	14 mm	4 – 50
Jaw To Right Rail Gap	6 mm	0.8 – 20
Locking Screw Dia	6 mm	3 – 16
Drive Screw Length	25 mm	8 – 80
Knob Dia	16 mm	8 – 40
Knob Thickness	8 mm	3 – 25
Screw Pad Dia	10 mm	4 – 30
Nose Fillet Radius	3 mm	0 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS