Plates and panels
Anchor Block
- Bounding box
- 30.0 × 30.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Plate 1: The Anchor Block Open a new Part file. On the Top Plane, sketch a center rectangle and dimension it to 30 mm x 30 mm. Use Extruded Boss/Base to a depth of 10 mm. Sketch two circles of 3.0 mm diameter on opposite corners of the top face (e.g., 4 mm inset from the edges). Use Extruded Cut (Through All) to create the dowel pin alignment holes. On the top face, sketch a single circle at the exact origin. Dimension this to the precise outer diameter of your 30G needle (approximately 0.31 mm). Use Extruded Cut (Through All). This creates the friction-fit bore for your capillary.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 30 mm | 10 – 60 |
| Base Width | 30 mm | 10 – 60 |
| Base Thickness | 10 mm | 2 – 20 |
| Dowel Hole Diameter | 3 mm | 1 – 8 |
| Dowel Hole Edge Inset | 4 mm | 1 – 10 |
| Needle Bore Diameter | 0.31 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service