Plates and panels
Air Compressor Style Quick Coupler
- Bounding box
- 50.0 × 50.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- August 15, 2026
Download
Free to download and use. See the terms.
The prompt
Air compressor style coupler in low profile short. Needs to be strong for pulling force, m6 threads to attach female end to car chassis and male end to the body panel side. The coupler acts as a quick release system to avoid drilling into the body so it needs to be able to fit into places
Parameters
| Name | Value | Range |
|---|---|---|
| Female Body Diameter | 42 mm | 30 – 60 |
| Female Body Height | 16 mm | 8 – 30 |
| Female Bore Diameter | 30.4 mm | 30.5 – 40 |
| Female Rear Wall Thickness | 2 mm | 1 – 6 |
| Locking Groove Width | 3 mm | 1 – 6 |
| Locking Groove Depth | 1.6 mm | 0.5 – 3 |
| Groove Offset from Front | 5 mm | 2 – 10 |
| Reinforced Collar Diameter | 50 mm | 40 – 70 |
| Reinforced Collar Height | 5 mm | 2 – 10 |
| M6 Thread/Tap Drill Diameter | 5 mm | 4.5 – 6.5 |
| Male Plug Diameter | 30 mm | 20 – 36 |
| Male Plug Insertion Length | 14 mm | 10 – 25 |
| Male Nose Tip Diameter | 26 mm | 20 – 30 |
| Male Nose Taper Length | 4 mm | 1 – 8 |
| Male Hollow Core Diameter | 20 mm | 10 – 26 |
| Male Hollow Core Depth | 8 mm | 2 – 12 |
| Male M6 Stud Diameter | 6 mm | 4 – 8 |
| Male M6 Stud Length | 12 mm | 6 – 20 |
| Locking Ring Offset from Tip | 9 mm | 2 – 12 |
| Locking Ring Width | 2.5 mm | 1 – 5 |
| Locking Ring Radial Height | 1.6 mm | 0.5 – 3 |
| Male Flange Diameter | 36 mm | 30 – 50 |
| Male Flange Thickness | 4 mm | 2 – 8 |
| Release Spring OD | 18 mm | 10 – 24 |
| Release Spring ID | 10 mm | 4 – 16 |
| Release Spring Thickness | 1.2 mm | 0.5 – 3 |
| Release Spring Count | 2 mm | 1 – 4 |
| Release Spring Start from Tip | 5 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con