Gears and transmission
AEROMORPH-GD Wing Mechanism
- Bounding box
- 950.0 × 60.0 × 36.4 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a professional 2D mechanical engineering CAD drawing sheet titled “AEROMORPH-GD – Gear-Driven Variable-Dihedral Wing Mechanism”, using orthographic front, side, top, component-detail, exploded, and dihedral-position views. Use a white background, black technical linework, dimension arrows, centre lines, and all dimensions in millimetres (mm). Components and dimensions: Total mechanism width: 160 mm Gearbox housing: 60 × 50 mm, mounting holes 4 × Ø4.5 mm BLDC motor: Ø28 × 30 mm Pinion gear: Ø10 mm, shaft Ø4 mm Main spur gear: Ø40 mm, centre/output bore Ø6 mm Hinge shaft: Ø6 × 50 mm Bearing: Ø25 × 7 mm Mounting plate: 50 × 50 × 5 mm, mounting holes 4 × Ø4.5 mm Locking index plate: R30 mm, thickness 5 mm, locking positions 0°, 10°, 20° Locking pin: Ø5 mm, 10 mm engagement, 12 mm travel Spring: Ø8 × 20 mm Wing spar adapter: 40 × 35 mm, hinge hole Ø6 mm, spar connection Ø12 mm Carbon-fibre wing spar: Ø12 × 40 mm connection length Wing connection: 40 × 35 mm Dihedral positions: 0° level, 10° dihedral, 20° dihedral Include an assembled side view, gearbox front view, gearbox side view, individual component drawings, exploded assembly view with numbered parts, and three front views showing 0°, 10°, and 20° wing dihedral. Make all dimensions highly readable and suitable for recreating the mechanism in SolidWorks.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap | 80 mm | 70 – 150 |
| Housing length | 60 mm | 30 – 120 |
| Housing width | 50 mm | 30 – 100 |
| Housing height | 20 mm | 5 – 60 |
| Housing hole diameter | 4.5 mm | 2 – 10 |
| Housing hole offset | 5 mm | 2 – 20 |
| Motor diameter | 28 mm | 10 – 60 |
| Motor length | 30 mm | 10 – 80 |
| Motor shaft diameter | 4 mm | 1 – 10 |
| Motor shaft length | 10 mm | 2 – 30 |
| Pinion module | 1 mm | 0.5 – 3 |
| Pinion teeth | 8 mm | 5 – 20 |
| Pinion face width | 6 mm | 2 – 20 |
| Pinion shaft diameter | 4 mm | 1 – 10 |
| Pinion shaft length | 10 mm | 2 – 30 |
| Main gear module | 1 mm | 0.5 – 3 |
| Main gear teeth | 38 mm | 12 – 80 |
| Main gear face width | 8 mm | 2 – 30 |
| Main gear bore diameter | 6 mm | 2 – 15 |
| Hinge shaft diameter | 6 mm | 2 – 15 |
| Hinge shaft length | 50 mm | 20 – 150 |
| Bearing outer diameter | 25 mm | 8 – 70 |
| Bearing inner diameter | 6 mm | 2 – 20 |
| Bearing width | 7 mm | 2 – 20 |
| Mounting plate length | 50 mm | 20 – 120 |
| Mounting plate width | 50 mm | 20 – 120 |
| Mounting plate thickness | 5 mm | 2 – 20 |
| Plate hole diameter | 4.5 mm | 2 – 10 |
| Plate hole offset | 5 mm | 2 – 20 |
| Index plate radius | 30 mm | 10 – 60 |
| Index plate thickness | 5 mm | 1 – 20 |
| Lock hole radius | 20 mm | 5 – 50 |
| Lock hole diameter | 5 mm | 1 – 12 |
| Index center bore diameter | 6 mm | 1 – 15 |
| Locking pin diameter | 5 mm | 1 – 12 |
| Locking pin engagement | 10 mm | 2 – 30 |
| Locking pin travel | 12 mm | 2 – 40 |
| Spring outer diameter | 8 mm | 3 – 20 |
| Spring length | 20 mm | 5 – 60 |
| Spring wire diameter | 1.2 mm | 0.3 – 4 |
| Spring pitch | 5 mm | 2 – 10 |
| Wing adapter length | 40 mm | 15 – 100 |
| Wing adapter width | 35 mm | 15 – 100 |
| Wing adapter thickness | 15 mm | 2 – 30 |
| Wing adapter hinge hole | 6 mm | 2 – 15 |
| Wing adapter spar connection | 12 mm | 4 – 25 |
| Wing spar diameter | 12 mm | 4 – 25 |
| Wing spar length | 40 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a