Gears and transmission
AeroMorph-GD Variable-Dihedral Gearbox Assembly
- Bounding box
- 507.2 × 60.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 51
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a clean **2D engineering CAD drawing** of the **AeroMorph-GD gear-driven variable-dihedral wing mechanism**. Show **only component names and dimensional measurements in millimetres (mm)**, with clear dimension arrows and no detailed explanations. Include these parts and dimensions: * **Gearbox Housing:** 60 mm × 50 mm * **BLDC Motor:** Ø28 mm × 30 mm * **Pinion Gear:** Ø10 mm * **Main Spur Gear:** Ø40 mm * **Output Shaft:** Ø6 mm * **Main Hinge Pin:** Ø6 mm * **Bearing:** Ø25 mm × 7 mm * **Hinge Bracket:** 50 mm × 50 mm * **Locking Index Plate:** R30 mm × 5 mm thick * **Locking Pin:** Ø5 mm × 10 mm engagement * **Locking Pin Travel:** 12 mm * **Spring:** Ø8 mm × 20 mm * **Spar Adapter:** 40 mm × 35 mm × 3 mm wall * **Carbon-Fibre Spar Connection:** Ø12 mm * **Mounting Holes:** 4 × Ø4.5 mm * **Dihedral Positions:** 0°, 10°, 20° Show **front view, side view, and exploded view**. Use a white background, black technical linework, light gray mechanical shading, professional CAD dimensions, and clearly labelled component names only.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 15 mm | 0 – 100 |
| Gearbox Housing Length | 60 mm | 20 – 200 |
| Gearbox Housing Width | 50 mm | 20 – 200 |
| Gearbox Housing Depth | 25 mm | 8 – 120 |
| Housing Wall Thickness | 4 mm | 1.5 – 12 |
| Outer Corner Fillet | 1.5 mm | 0 – 3 |
| Motor Body Diameter | 28 mm | 10 – 80 |
| Motor Body Length | 30 mm | 10 – 120 |
| Motor Shaft Diameter | 5 mm | 2 – 20 |
| Motor Shaft Protrusion | 6 mm | 1 – 40 |
| Gear Module | 0.8 mm | 0.3 – 3 |
| Pinion Teeth | 12 count | 6 – 40 |
| Pinion Face Width | 5 mm | 2 – 30 |
| Pinion Bore | 5 mm | 1 – 20 |
| Spur Gear Teeth | 48 count | 10 – 120 |
| Spur Gear Face Width | 8 mm | 2 – 40 |
| Spur Gear Bore | 6 mm | 1 – 30 |
| Output Shaft Diameter | 6 mm | 2 – 30 |
| Output Shaft Length | 80 mm | 10 – 300 |
| Main Hinge Pin Diameter | 6 mm | 2 – 30 |
| Main Hinge Pin Length | 100 mm | 10 – 400 |
| Bearing Outer Diameter | 25 mm | 15 – 80 |
| Bearing Bore | 6 mm | 3 – 30 |
| Bearing Width | 7 mm | 3 – 30 |
| Bearing Ball Count | 8 count | 4 – 16 |
| Hinge Bracket Size | 50 mm | 20 – 200 |
| Hinge Bracket Thickness | 8 mm | 2 – 40 |
| Mounting Hole Diameter | 4.5 mm | 1.5 – 12 |
| Mounting Hole Count | 4 count | 2 – 8 |
| Mounting Hole Pitch Radius | 21 mm | 5 – 90 |
| Index Plate Radius | 30 mm | 10 – 100 |
| Index Plate Thickness | 5 mm | 1.5 – 20 |
| Index Plate Center Bore | 12 mm | 3 – 40 |
| Position Slot Diameter | 5 mm | 2 – 15 |
| Position Slot Radius | 26 mm | 5 – 90 |
| Dihedral Position 1 | 0 deg | -45 – 45 |
| Dihedral Position 2 | 10 deg | -45 – 45 |
| Dihedral Position 3 | 20 deg | -45 – 45 |
| Locking Pin Diameter | 5 mm | 1.5 – 20 |
| Locking Pin Engagement | 10 mm | 3 – 40 |
| Locking Pin Head Diameter | 8 mm | 2 – 25 |
| Locking Pin Head Length | 3 mm | 1 – 15 |
| Spring Outside Diameter | 8 mm | 3 – 30 |
| Spring Free Length | 20 mm | 5 – 80 |
| Spring Wire Diameter | 1 mm | 0.3 – 4 |
| Spring Coil Pitch | 3 mm | 1.2 – 15 |
| Spar Adapter Width | 40 mm | 10 – 150 |
| Spar Adapter Height | 35 mm | 10 – 150 |
| Spar Adapter Length | 40 mm | 10 – 200 |
| Spar Adapter Wall | 3 mm | 1 – 12 |
| Carbon-Fibre Spar Connection | 12 mm | 3 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a