Gears and transmission
AeroMorph-GD Exploded Mechanism Assembly
- Bounding box
- 565.0 × 40.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a clear 2D CAD engineering drawing of the AeroMorph-GD gear mechanism with dimensions as the main priority, showing every critical measurement in mm for the motor, gearbox, pinion gear, main gear, hinge pin, locking plate, locking pin, spar adapter, mounting holes, and centre distances. Include front, side, top, sectional, and exploded views, with 0°, 10°, and 20° wing positions, using precise dimension arrows and professional SolidWorks technical-drawing style.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded row spacing | 70 mm | 50 – 200 |
| Motor body diameter | 40 mm | 20 – 80 |
| Motor body length | 60 mm | 30 – 120 |
| Output shaft / pinion bore diameter | 6 mm | 3 – 12 |
| Output shaft length | 12 mm | 5 – 30 |
| Gearbox length | 50 mm | 30 – 100 |
| Gearbox width | 35 mm | 20 – 80 |
| Gearbox height | 40 mm | 20 – 80 |
| Mounting hole diameter | 6.5 mm | 4 – 10 |
| Mounting hole pattern X | 35 mm | 10 – 60 |
| Mounting hole pattern Y | 25 mm | 10 – 50 |
| Gear module | 1.5 mm | 0.5 – 4 |
| Pinion teeth | 10 | 5 – 40 |
| Main gear teeth | 24 | 10 – 80 |
| Pinion face width | 8 mm | 3 – 20 |
| Main gear face width | 8 mm | 3 – 20 |
| Hinge / pivot diameter | 8 mm | 4 – 16 |
| Hinge pin length | 50 mm | 20 – 100 |
| Locking plate length | 45 mm | 20 – 80 |
| Locking plate width | 25 mm | 10 – 50 |
| Locking plate thickness | 3 mm | 1 – 8 |
| Locking plate centre bore | 8 mm | 4 – 15 |
| Locking slot / detent diameter | 4 mm | 2 – 10 |
| Locking slot pitch radius | 10 mm | 5 – 30 |
| Slot angle 0° position | 0 deg | -90 – 90 |
| Slot angle 10° position | 10 deg | -90 – 90 |
| Slot angle 20° position | 20 deg | -90 – 90 |
| Locking pin diameter | 4 mm | 1 – 8 |
| Locking pin length | 20 mm | 5 – 40 |
| Spar adapter length | 30 mm | 15 – 60 |
| Spar adapter width | 20 mm | 10 – 50 |
| Spar adapter height | 15 mm | 5 – 30 |
| Spar adapter hole diameter | 6.5 mm | 4 – 12 |
| Hinge to spar hole distance | 18 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a