Plates and panels
Adjustable Square Tube Hinge Connector (Heavy Duty, 19mm)
- Bounding box
- 130.0 × 36.0 × 19.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Write an OpenSCAD script for a two-piece heavy-duty adjustable square tube hinge connector designed for 19mm x 19mm square tubing with 1.2mm wall thickness (16.6mm x 16.6mm internal opening). The model consists of two separate mirrored halves (Left and Right) laid out side-by-side on the build plate for 3D printing, rather than two identical copies. Each half features: 1. A substantial cylindrical hinge hub: 36mm outer diameter and 19mm total height when assembled (each half is 9.5mm thick, with one half having a recessed top step and the other a matching bottom step so the two square tube inserts stay aligned on the exact same center plane when rotated from 0 to 180 degrees). 2. A central through-hole in the hub (6.2mm diameter for an M6 bolt) with a countersunk hexagonal recess (10.2mm across flats, 4mm deep) on the outer face of one half to hold a hex nut/bolt head flush. 3. A tangentially offset square plug/insert extending from the hub that fits snugly inside the 16.6mm x 16.6mm tube (designed at 16.4mm x 16.4mm x 28mm long with 1.5mm rounded vertical edges for a tight friction fit). 4. A 19mm x 19mm shoulder collar (4mm long) between the hub and the insert plug so the outer tube walls sit flush against the hinge body. 5. Structural cutouts in the insert plug (two square hollow pockets on top and longitudinal friction ribs along the sides) to save material and improve grip inside the tube. Set \$fn = 64 for smooth curves. Reply with ONE fenced ```openscad block containing the whole script and nothing else.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube Outside | 19 mm | 10 – 60 |
| Tube Wall | 1.2 mm | 0.5 – 5 |
| Press-Fit Clearance | 0.2 mm | 0 – 1 |
| Insert Plug Length | 28 mm | 10 – 80 |
| Collar Length | 4 mm | 1 – 15 |
| Plug Edge Radius | 1.5 mm | 0 – 4 |
| Plug Tip Chamfer | 1 mm | 0 – 3 |
| Friction Rib Count | 3 pcs | 0 – 6 |
| Rib Width | 1.5 mm | 0.5 – 5 |
| Rib Relief | 0.3 mm | 0 – 1 |
| Pocket Size | 8 mm | 2 – 14 |
| Pocket Depth | 5 mm | 0.5 – 10 |
| Pocket Gap | 4 mm | 1 – 20 |
| Hub Diameter | 36 mm | 20 – 80 |
| Hub Thickness per Half | 9.5 mm | 3 – 20 |
| Hinge Bolt Hole | 6.2 mm | 3 – 12 |
| Hex Recess A/F | 10.2 mm | 5 – 20 |
| Hex Recess Depth | 3 mm | 0.5 – 6 |
| Alignment Step Width | 4 mm | 0 – 12 |
| Alignment Step Depth | 2 mm | 0 – 4 |
| Hinge Axis Offset | 10 mm | 8 – 16 |
| Plate Spacing | 10 mm | 2 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
