Everything else
Adjustable Laser-Tape Post Holder
- Bounding box
- 40.0 × 50.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
I would like to build and ajustible holeder for a lazer tape it needs to have a right angle on the back side to line up to a post and the nose of the part needs to be 45 degrees and be able it lift into the air 80 degrees
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (across X) | 40 mm | 20 – 90 |
| Body Depth (front to back) | 50 mm | 25 – 120 |
| Body Height | 40 mm | 20 – 100 |
| Back V-Groove Angle (right angle) | 90 deg | 60 – 120 |
| Back V-Groove Depth | 8 mm | 2 – 16 |
| Nose Angle | 45 deg | 20 – 80 |
| Nose Chamfer Rise | 20 mm | 4 – 30 |
| Lift / Tilt Range | 80 deg | 10 – 120 |
| Arc Slot Radius | 18 mm | 10 – 30 |
| Arc Slot Width | 6 mm | 3 – 12 |
| Pivot Bore Diameter | 8 mm | 4 – 16 |
| Pivot Position from Back | 22 mm | 8 – 40 |
| Pivot Height from Base | 12 mm | 6 – 30 |
| Nose Fillet Radius | 3 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like