Gears and transmission
Adaptive Robotic Seed Planter Chassis
- Bounding box
- 400.0 × 315.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed, dimensionally accurate 3D CAD model of the main chassis for an Adaptive Robotic Seed Planting Machine. **Design requirements:** 1. Overall chassis length: 400 mm. 2. Overall chassis width: 300 mm. 3. Chassis height: 60 mm. 4. Material: Mild steel or aluminium. 5. Frame type: Rectangular mechanical frame. 6. Use rectangular hollow sections or solid rectangular structural members. 7. Provide four wheel mounting brackets, one at each corner. 8. Provide mounting holes for four DC geared motors. 9. Add a central mounting platform for the seed hopper. 10. Provide mounting holes for the seed metering mechanism. 11. Include a rear mounting section for the furrow opener and seed dispensing assembly. 12. Provide a front mounting plate for ultrasonic sensors. 13. Include mounting holes for the Arduino/ESP32 controller enclosure. 14. Provide a separate battery mounting platform. 15. All holes must be properly positioned and dimensioned. 16. Use rounded edges where mechanically appropriate. 17. Ensure that all components have sufficient clearance for assembly. **CAD requirements:** - Create a fully editable parametric 3D solid model. - Use millimetres as the unit. - Keep the design symmetrical. - Avoid unnecessary decorative features. - Ensure that the frame is mechanically practical and manufacturable. - Provide a clean engineering-style model. - Make the model suitable for a small academic prototype. Generate the actual 3D CAD geometry, not just a rendered image. Export the model in STEP and STL formats if supported.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 400 mm | 250 – 600 |
| Chassis Width | 300 mm | 150 – 500 |
| Chassis Height | 60 mm | 30 – 120 |
| Structural Rail Width | 20 mm | 10 – 40 |
| Platform Plate Thickness | 6 mm | 3 – 15 |
| Plate Corner Radius | 8 mm | 0 – 20 |
| Hopper Platform Length | 220 mm | 100 – 350 |
| Hopper Platform Width | 280 mm | 80 – 400 |
| Hopper Bolt Hole Dia | 6.5 mm | 3 – 12 |
| Hopper Hole Spacing X | 160 mm | 40 – 300 |
| Hopper Hole Spacing Y | 200 mm | 40 – 350 |
| Rear Plate Width | 160 mm | 60 – 280 |
| Rear Plate Height | 50 mm | 20 – 100 |
| Rear Plate Thickness | 8 mm | 3 – 20 |
| Rear Mount Hole Dia | 8.5 mm | 3 – 16 |
| Rear Hole Spacing Y | 100 mm | 20 – 200 |
| Rear Hole Spacing Z | 30 mm | 10 – 60 |
| Front Sensor Plate Width | 120 mm | 40 – 250 |
| Front Sensor Plate Height | 50 mm | 20 – 100 |
| Front Sensor Plate Thickness | 6 mm | 3 – 15 |
| Ultrasonic Sensor Hole Dia | 18 mm | 8 – 30 |
| Sensor Hole Spacing | 70 mm | 20 – 150 |
| Controller Tray Length | 80 mm | 30 – 150 |
| Controller Tray Width | 50 mm | 20 – 100 |
| Controller Tray Thickness | 6 mm | 3 – 12 |
| Controller Hole Dia | 4.5 mm | 2 – 8 |
| Controller Hole Spacing X | 50 mm | 10 – 100 |
| Controller Hole Spacing Y | 30 mm | 10 – 60 |
| Wheel Bracket Width | 60 mm | 30 – 100 |
| Wheel Bracket Height | 50 mm | 20 – 100 |
| Wheel Bracket Thickness | 8 mm | 3 – 15 |
| Wheel Bracket X Offset | 60 mm | 20 – 150 |
| Wheel Axle Hole Dia | 12 mm | 4 – 25 |
| Wheel Axle Height | 30 mm | 10 – 50 |
| Motor Mount Hole Dia | 6.5 mm | 3 – 12 |
| Motor Hole Spacing X | 30 mm | 10 – 60 |
| Motor Hole Spacing Z | 18 mm | 8 – 40 |
| Battery Platform Length | 180 mm | 60 – 300 |
| Battery Platform Width | 140 mm | 60 – 250 |
| Battery Platform Thickness | 8 mm | 3 – 20 |
| Battery Hole Dia | 6.5 mm | 3 – 12 |
| Battery Hole Spacing X | 140 mm | 30 – 250 |
| Battery Hole Spacing Y | 100 mm | 30 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
