AAC Token

Create a polished 3D-printable AAC communication token for a nonverbal autistic child. The token should look like a finished product, not a rough prototype. It should be simple, durable, rounded, child-friendly, and easy to print. Token body: - 66 mm wide - 66 mm tall - 10.5 to 11.5 mm thick - rounded square shape with large soft corners, about 7 mm radius - smooth beveled or filleted edges - centered pull tab at the top - pull tab about 24 mm wide and 10 mm tall - pull tab should be rounded and easy for a child to grab - flat enough to print without supports Front side: Create a clearly visible front-loading picture tray. - recessed pocket for a wrapper, photo, symbol, or laminated picture - pocket opening about 54 mm x 54 mm - pocket depth about 2 mm - raised border around the picture area - make it look like a clean picture-frame tray - the front pocket must be obvious and usable, not just a shallow marking Back side: Create two visible recessed magnet pockets on the back. - for 10 mm diameter x 3 mm thick round disc magnets - pocket diameter 10.4 mm - pocket depth 3.2 mm - place magnets vertically on the centerline - one pocket 16 mm above center - one pocket 16 mm below center - pockets must be open and accessible from the back Style: - rounded edges - clean minimal product look - no sharp corners - no thin fragile features - suitable for PLA or PETG - no supports required - export as STL

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.