Plates and panels
A.U.D.I.T. gantry assembly v2
- Bounding box
- 360.0 × 380.0 × 794.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
A.U.D.I.T. gantry assembly with sloped tank floor draining to the front edge, plus fixture plate on level-compensating standoffs.
Parameters
| Name | Value | Range |
|---|---|---|
| Probe X position | 0 mm | -90 – 90 |
| Probe Y position | 0 mm | -90 – 90 |
| Probe face height above lowest tank floor | 137 mm | 70 – 230 |
| Floor slope toward drain | 2.5 deg | 0 – 4 |
| Plate size (square) | 200 mm | 150 – 240 |
| Plate thickness | 6 mm | 4 – 10 |
| Gap under plate at highest floor point | 10 mm | 5 – 20 |
| M3 hole grid pitch | 25 mm | 15 – 40 |
| M3 tap drill diameter | 2.5 mm | 2 – 3.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
