Plates and panels
A.U.D.I.T. full assembly v4
- Bounding box
- 425.0 × 501.2 × 794.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Full A.U.D.I.T. assembly: frame, X-Y-Z gantry with motors, belts, cross-shaft and endstops, sloped tank with fixture plate, water system with float switch, and electronics (controller board, TMC2209 modules, PSU) on a rear shelf.
Parameters
| Name | Value | Range |
|---|---|---|
| Probe X position | 0 mm | -90 – 90 |
| Probe Y position | 0 mm | -90 – 90 |
| Probe face height above lowest tank floor | 137 mm | 70 – 230 |
| Floor slope toward drain | 2.5 deg | 0 – 4 |
| Plate size (square) | 200 mm | 150 – 240 |
| Plate thickness | 6 mm | 4 – 10 |
| Gap under plate at highest floor point | 10 mm | 5 – 20 |
| M3 hole grid pitch | 25 mm | 15 – 40 |
| M3 tap drill diameter | 2.5 mm | 2 – 3.5 |
| Spacing between the two jets | 140 mm | 60 – 160 |
| Jet nozzle outer diameter | 8 mm | 6 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Rectangular Duct Elbow 90
creat a 3d hvac rectanglar duct elbow with a 90degree bend . duct width 30mm , height 200mm, and sheet metal thickness 0.8mm.
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
