Loading the interactive model…
Interactive 3D model of 90-Deg V-Bending Die Block & Punch SetEverything else
90-Deg V-Bending Die Block & Punch Set
1 views
- Bounding box
- 100.0 × 60.0 × 102.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
Punch
Parameters
| Name | Value | Range |
|---|---|---|
| Die Length | 100 mm | 40 – 300 |
| Die Width | 50 mm | 20 – 200 |
| Die Height | 40 mm | 15 – 200 |
| V-Groove Angle | 90 deg | 30 – 150 |
| V-Groove Opening | 40 mm | 5 – 150 |
| Corner Fillet | 3 mm | 0 – 15 |
| Punch Length | 100 mm | 20 – 300 |
| Punch Width | 30 mm | 5 – 150 |
| Punch Height | 20 mm | 5 – 150 |
| Punch Tip Flat | 4 mm | 0.5 – 20 |
| Mount Plate Length | 100 mm | 20 – 300 |
| Mount Plate Width | 60 mm | 20 – 200 |
| Mount Plate Thickness | 12 mm | 4 – 50 |
| Mount Bolt Hole Dia | 9 mm | 2 – 25 |
| Bolt Spacing (X) | 70 mm | 10 – 280 |
| Bolt Spacing (Y) | 40 mm | 10 – 160 |
| Shank Diameter | 20 mm | 6 – 80 |
| Shank Height | 35 mm | 5 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS