Plates and panels
56mm ABS serpentine water chamber cold plate
- Bounding box
- 76.0 × 56.0 × 13.8 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Single-piece parametric ABS cold plate, body 56x56x13.75 mm, central empty 40.3x40.3 mm sink pocket, outside plenums, two serpentine dividers, opposed high barbs, RTV seal groove.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length | 56 mm | 40 – 80 |
| Body width | 56 mm | 40 – 80 |
| Body height | 13.75 mm | 10 – 25 |
| Floor | 3 mm | 1 – 8 |
| Sink size | 40 mm | 20 – 60 |
| Pocket clearance per side | 0.15 mm | 0.05 – 0.5 |
| Sink fin count | 12 count | 4 – 30 |
| Sink fin thickness | 1.2 mm | 0.5 – 2.5 |
| Sink fin gap | 2 mm | 0.5 – 4 |
| Fin-4 center Y reference | 21.33 mm | 8.5 – 47.5 |
| Fin-group pitch | 13.34 mm | 10 – 18 |
| Plenum depth | 5.5 mm | 3 – 10 |
| Fin-space ceiling Z | 11.5 mm | 8 – 13 |
| End wall | 2.5 mm | 1 – 5 |
| Divider thickness | 1 mm | 0.8 – 1.8 |
| Divider 30-degree taper length | 0.87 mm | 0.5 – 2 |
| Right divider Y | 21.33 mm | 9 – 47 |
| Left divider Y | 34.67 mm | 9 – 47 |
| Plenum corner R | 2 mm | 0.5 – 3 |
| 45-degree plenum chamfer | 3 mm | 1 – 4 |
| Floor/roof blend R | 2 mm | 0.5 – 2.5 |
| Port center Z | 8.5 mm | 5 – 11 |
| Inlet Y | 14.67 mm | 8 – 48 |
| Outlet Y | 41.33 mm | 8 – 48 |
| Bore diameter | 6 mm | 3 – 10 |
| Plenum flare diameter | 8 mm | 6 – 10 |
| Flare length | 3 mm | 1 – 5 |
| Barb OD | 8 mm | 6 – 12 |
| Barb length | 10 mm | 5 – 15 |
| Ridge OD | 9.2 mm | 8 – 12 |
| Ridge axial length | 1.2 mm | 0.5 – 3 |
| Ridge from tip | 6 mm | 2 – 8 |
| Port edge R | 1 mm | 0.2 – 1.5 |
| Seal groove width | 1.5 mm | 0.8 – 3 |
| Seal groove depth | 1 mm | 0.5 – 1.5 |
| Outer vertical edge R | 0.5 mm | 0.2 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
