Everything else
50 ml Anti-Drip Oil Pot with Dustproof Sealed Cap
- Bounding box
- 62.0 × 45.9 × 72.1 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 50ml kitchen anti-drip oil pot, total height 72mm, elliptical body 48mm*42mm, wall thickness 2.5mm. Equipped with 12mm anti-drip spout, sharp tip and annular oil baffle to prevent outer wall oil leakage. Add 1mm pressure balance vent hole and sealed dustproof cap. Generate editable 3D CAD model with complete dimensions for manufacturing.
Parameters
| Name | Value | Range |
|---|---|---|
| Body major axis (X) | 48 mm | 30 – 80 |
| Body minor axis (Y) | 42 mm | 25 – 70 |
| Body height | 65 mm | 40 – 100 |
| Wall thickness | 2.5 mm | 1.2 – 5 |
| Flat bottom thickness | 3 mm | 1.5 – 8 |
| Spout protrusion | 12 mm | 5 – 25 |
| Spout axis height | 57 mm | 30 – 62 |
| Spout root OD | 8 mm | 4 – 16 |
| Spout tip OD | 6 mm | 3 – 12 |
| Pour bore at root | 5 mm | 2 – 12 |
| Pour bore at tip | 4 mm | 1.5 – 10 |
| Tip sharpening length | 1.2 mm | 0.4 – 4 |
| Knife-edge tip wall | 0.6 mm | 0.4 – 1.5 |
| Baffle thickness | 1.5 mm | 0.6 – 5 |
| Baffle outer dia | 6 mm | 2.5 – 9 |
| Baffle flow hole dia | 3.6 mm | 1 – 6 |
| Cap lid thickness | 7 mm | 3 – 15 |
| Sealing plug depth | 8 mm | 2 – 20 |
| Plug interference fit | 0.2 mm | 0 – 0.6 |
| Dust skirt depth | 4 mm | 1 – 12 |
| Dust skirt wall | 1.6 mm | 0.8 – 4 |
| Skirt slip clearance | 0.35 mm | 0.1 – 1 |
| Cap top edge fillet | 1.5 mm | 0 – 3 |
| Balance vent dia | 1 mm | 0.5 – 3 |
| Vent offset from centre | 12 mm | 3 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like